mfds

Manages the Directory Server.

Syntax for starting or stopping the Directory Server:

mfds [/d|/n network-address] [/j journal-path] [/r]

Syntax for stopping the Directory Server:

mfds /s option [username password]

Syntax for reporting and exporting information:

mfds /v
mfds /m
mfds /e root-DN user-partition-DN group-partition-DN
		  resource-partition-DN schema-format ldif-filename
		  sec-path
mfds /l [schema partition Distinguished Name] option ldif-filename [schema-version-1] [schema-version-2]

Syntax for exporting the currently active MFDS process repository to a specified path:

mfds /x [repository type] [repository address] [server name] <options> <user id> <password>
CAUTION:
If MFDS is configured to store sensitive values in the vault (for example XA openstring or autostart credentials), these values can be included when exporting Enterprise Server configuration data in legacy file, XML, or JSON format. Micro Focus recommends that you protect the exported files with appropriate access control.

Examples:

"mfds /x 1 c:\myrepository *"
"mfds /x 1 c:\myrepository * S"
"mfds /x 1 c:\myrepository * O"
"mfds /x 1 c:\myrepository * SO"
"mfds /x 1 c:\myrepository ESDEMO"
"mfds /x 1 c:\myrepository ESDEMO D myid mypwd"

Syntax for creating a readable journal file from a binary journal file:

mfds /t output-filename input-filename
Note:

If output-filename is not specified, a default file of journal.txt will be created in the same directory as the input-filename

If input-filename is not specified, the default journal.dat file as specified by the default MFDS options file (mfdsacfg.xml) will be used. By default, the mfdsacfg.xml file is located in %ProgramFiles(x86)%\Micro Focus\Enterprise Server\etc.

This option can only convert journal.dat files to text if they have originated on the same hardware and software platform; it is not guaranteed that journal files imported from UNIX can be read by Windows and vice versa.

Syntax for secure access to MFDS:

mfds /b

Use this startup option to block anonymous read access to the MFDS Enterprise Server configuration data. If this option is specified, applications that connect to the MFDS process to query Enterprise Server configuration information (for example, mdump and other utilities) will be required to specify valid credentials based on the current MFDS security configuration, otherwise the connection will be rejected.

Note: From Enterprise Developer 7.0, this has become the default behavior.

Syntax for installing and uninstalling Windows services:

mfds /c
mfds /u
mfds /i

Syntax for importing an XML formatted repository:

mfds /g [repository type] [repository address] <opts> <user id> <password>

Parameters:

/c
Install the Directory Server as a Windows service, and when it runs, show the debug information console. Once you have issued the mfds command with this parameter, you start Directory Server using the Windows Control Panel.
/d
Show debug information; this is a record of activity on the Directory Server that can be useful when investigating problems
/e root DNuser partition DNgroup partition DNresource partition DNschema formatldif-filenamesec-path
Export Directory Server users and groups from the MF Directory Server repository to an LDIF file:
  • root-DN

    The application partition to which all of the exported entries will be assigned.

  • user-partition-DN

    The name of the container within the application partition to which the exported users will be assigned.

  • group-partition-DN

    The container within the application partition to which the exported groups will be assigned.

  • root-DN

    The container within the application partition to which the exported resource definitions will be assigned.

  • schema-format

    Values: 1 = Active Directory (Default).

  • sec-path

    The location of the MF Directory Server repository.

/i
Install the Directory Server as a Windows service, and when it runs, do not show the debug information console. Once you have issued the mfds command with this parameter, you start Directory Server using the Windows Control Panel.
/j directory-path
Override the journal path. Journal data will be written to the filesystem directory that you specify. For example: mfds /j e:\journal
/l [schema partition Distinguished Name] optionldif-filename [schema-version-1] [schema-version-2]
Export the schema extensions that an LDAP server will require to support Micro Focus applications.
schema partition Distinguished Name
Specifies the DN of the partition in the Directory Information Tree where the schema definition is held. The schema partition holds, amongst other things, attributeSchema and classSchema objectclass instances.
option
Specifies the target directory server type:
0
Microsoft Active Directory Lightweight Directory Server (AD LDS)
1
Active Directory

This is the default value.

2
OpenLDAP
3
Sun Directory
4
OpenLDAP (v2.4)
Note: If you specify the ldif-filename, you must also specify a value for this parameter.
ldif-filename
Specifies the name of the destination file.

The default: mfds_schema_[ mfds version ].ldf (for example, mfds_schema_1.05.09.ldf)

schema-version-1
Specifies the version of the schema extensions to be generated:
0
Is the current schema version and is the default value. Numbers greater than 0 specify older schema versions.
schema-version-2
This option is used for upgrading from a previous schema. If schema-version-2 is specified and is less than the schema-version-1, the output file is a delta between the schema-version-1 and schema-version-2.

If schema-version-2 is greater than or equal to schema-version-1, this option is ignored.

/m
Display the location of the Directory Server repository.
/n network-addresses
Bind to specific network adapters at network-addresses, where network-addresses can be an IPv4, IPv6 address, or a hostname. Multiple addresses can be specified as a quoted, space-separated list. Each address can be specified with either TCP: or UDP: protocol proceeding the address. For example:
mfds /n "TCP:252.162.131.105 UDP:6202:8e2a:686a:6a77:2855:c4df:960f:3cc2 TCP:host-name"
Note: If a UDP protocol is used then MFDS will attempt to start the UDP listener on that address. If no UDP protocol is used then MFDS will use the first available IPv4 address to start the UDP listener on.

If "0.0.0.0" is specified for the network-address then it will listen on all IPv4 addresses and if "::" is specified then it will listen on all IPv6 addresses. You can combine these to listen on both IPv4 and IPv6 addresses, for example, mfds /n "0.0.0.0 ::"

/r
Refuse access to the Enterprise Server Administration interface.
/s option [username password]
Request a controlled shutdown of a Directory Server and optionally the associated enterprise servers. If the Directory Server is not using the default port, then you must specify the CCITCP2_PORT environment variable with the port that is being used.
Option:
  • Value 1: Shutdown the Directory Server only
  • Value 2: Shutdown the Directory Server and any associated enterprise servers.

Username and password: These must be supplied if the Directory Server is running with Restrict administration access checked.

This option supports the specification of the optional Enterprise Server user id and password parameters using a configured Micro Focus Vault Facility location rather than using literal strings for credentials. For example:
mfds /s 1 mfsecret:user/user_001/id mfsecret:user/user_001/pwd
where user/user_001/id and user/user_001/pwd are examples of secrets stored in the default configured vault. These values can be populated and administered using the mfsecretsadmin utility. See Vault Facility for more information.

The mfds /x and /g command-line options also support credentials stored in the vault.

/u
Uninstall Directory Server as a Windows service
/v
Show version information for Directory Server
/x [repository type]
Enables you to export the Enterprise Server configuration information from the running MFDS process. You can exported in either of the following formats:
1
file://
5
XML
CAUTION:
If MFDS is configured to store sensitive values in the vault (for example XA openstring or autostart credentials), these values can be included when exporting Enterprise Server configuration data in legacy file, XML, or JSON format. Micro Focus recommends that you protect the exported files with appropriate access control.
[repository address]
Absolute directory path to repository.
[server name]
* = export all servers
<opts>
  • D = (default) do not delete or overwrite any existing repository contents at specified location.
  • O = delete and overwrite any existing repository contents at specified location.
  • S = export server and security manager configuration.
<user id> <password>
These are the MFDS credentials required if administration access is restricted.
/g [repository type]
Enables you to import the Enterprise Server configuration into the current running MFDS process. You can import either of the following formats:
1
file://
5
XML
[repository address]
Absolute directory path to repository.
<opts>
  • D = Default import, do not delete or overwrite any existing regions with a duplicate name in the current repository.
  • O = Delete and overwrite any existing regions with a duplicate name in the current repository.
    Note: The D and O options are mutually exclusive.
  • S = Import server and security manager configuration.
    Note: MFDS restricted administration access must be OFF.
<user id> <password>
These are the MFDS credentials required if administration access is restricted.
--listen-all
Set MFDS to listen on all configured network adapters.
--listen-loopback
Set MFDS to listen on loopback only.
--vault-migrate
Migrates sensitive data values from the default MFDS repository into the configured vault. From Enterprise Developer 8.0, the migration occurs automatically when MFDS first starts. Once migrated, sensitive data values stored in the MFDS repository are removed and are available only from the configured vault.
--ui-on
Set MFDS to enable Web UI.
--ui-off
Set MFDS to disable Web UI.
--anonymous-access-on
Set MFDS to allow anonymous client access.
--anonymous-access-off
Set MFDS to disallow anonymous client access.

Comments:

Note: Issuing an mfds command with any of the parameters /c, /e, /i, /l, /m, /u, /v does not start the Directory Server.

You can use both a dash (-) or a forward slash (/) before a parameter.