Distributed Action Handler 24.2

# Configure SSL in a Stand-Alone System

Use the following procedure to configure SSL in a setup where you configure the DAH in the stand-alone DAH configuration file.

To configure an SSL connection in a stand-alone system

1. Open the DAH configuration file in a text editor.

2. Find either the `[Server]` section, the `[DistributedEngineN]` section, or both.

3. Add the SSLConfig setting to specify the section in which you have set the SSL details for the connection, usually `SSLOptionN`. For example:

       [Server]
       (other server settings...)
       SSLConfig=SSLOption0

       [DistributedEngine0]
       SSLConfig=SSLOption0

       [DistributedEngine1]
       SSLConfig=SSLOption1

   In this example, incoming ACI calls and outgoing calls to `DistributedEngine0` share the same SSL configuration, and outgoing calls to `DistributedEngine1` use a different configuration.

4. Create an `[SSLOptionN]` section for each unique SSLConfig setting. Each `SSLOption` entry must contain the SSLMethod, SSLCertificate, and SSLPrivateKey parameters. For example:

       [SSLOption0]
       SSLMethod=TLSV1.3
       SSLCertificate=host1.crt
       SSLPrivateKey=host1.key

       [SSLOption1]
       SSLMethod=TLSV1.3
       SSLCertificate=host2.crt
       SSLPrivateKey=host2.key

5. Save and close the configuration file.

6. Restart the DAH for your changes to take effect.

Copyright 2024 Open Text
Version 24.2 | Last updated March 2024

Send documentation feedback

Close

Send documentation feedback

To send feedback using your default email client, open an email window.

Otherwise, send your feedback and the information below to MFI-swpdl.idoldocsfeedback@opentext.com.

We appreciate your feedback!

Product: IDOL Distributed Action Handler 24.2

Topic Title: Configure SSL in a Stand-Alone System