Skip to content

Configure File Transfer in 3270, 5250, or VT Sessions

If your InfoConnect product includes support for 3270, 5250 and VT terminal sessions, you can use this procedure to configure transfer settings for these session types. Any configuration you perform is saved with your session document.

However, in most cases, using the default configuration is recommended.

To configure file transfer

  1. Open a terminal session.

  2. Open the Transfer Settings dialog box.

    The steps depend on your user interface mode.

    User Interface Mode Steps
    The InfoConnect Ribbon On the Session tab, from the Transfer group, click File Transfer. In the Transfer dialog box, click the Settings button.
    The InfoConnect Browser On the InfoConnect menu, choose Tools and then File Transfer. In the Transfer dialog box, click the Settings button.
    TouchUX Tap the Wrench icon and then under Tools, select File Transfer. In the Transfer dialog box, click the Settings button.
    Classic MDI From the Options menu, select Settings. Under File Transfer, click Configure Transfer Settings. (From VT sessions, go to Setup > File Transfer.)

  3. Configure the file transfer settings. For most situations, you can configure for file transfers by selecting a preset configuration in the Protocol tab (For example, AS/400).