Action Tab
By double-clicking the bitmap button, or, a button you can specify the action that this button should perform and the bitmap to appear on it.
|
Options |
Description |
|---|---|
|
|
From the Category list box, click the name of the menu or other category that contains the action to perform. |
|
|
From the Commands list box, click the action that this button should perform. Depending on which action you click, the dialog box might prompt you for additional information. For example, if you click Send Keystrokes, you must specify which keystrokes to send. |
|
|
Enter a brief description of the action. |
|
|
This button launches the dialog box. |
Action Tab Help
Use this dialog box to specify which action to perform. First, select the desired Category, and then select the Command. Some commands require additional selections or entries.
If an action listed here does not appear in the Commands list box, it might not be supported by your emulator, or security for the action might be enabled.
Table 3-7 Action > Details > FILE
|
Category |
Command |
Function |
|---|---|---|
|
File |
Capture |
Begin or stop capturing buffers sent from the host. If a capture is not in progress, this command initiates it. If a capture is in progress, this command ends it. |
|
|
If Show Capture Dialog When Start Capture is selected on the Global Preferences dialog box, the Capture dialog box appears when you invoke this command, and the capture begins when you click OK on this dialog box. If this option is cleared, the Capture dialog box does not appear, and the capture begins immediately when you invoke this command, using the current configuration settings. |
|
|
File |
Close All |
Close all open session windows |
|
File |
Close Session |
Close the active session window |
|
File |
Exit |
Exit Accessory Manager |
|
File |
New Session |
Run the New Session Wizard so that you can create a new session |
|
File |
Open Layout |
Display the Open Layout dialog box so that you can select the layout file to open |
|
File |
Open Session |
Display the Open Session dialog box so that you can select the session to open |
|
File |
Print All |
Print all screens of a split-screen session |
|
File |
Print Screen |
Display the Print dialog box so that you can print the current screen or the selected text on the screen |
|
File |
Print Screen Dialog |
Display the Print Screen Printer Settings dialog box so that you can change printer settings |
|
File |
Page Setup |
Display the Page Setup dialog box so that you can configure such printing options the paper orientation, margins, printer to use, etc. |
|
File |
Save Layout |
Display the Save Layout As dialog box so that you can save the currently open sessions in a layout file |
|
File |
Save Session |
Save the session |
|
File |
Save Session As |
Display the Save As dialog box so that you can save the session under a different name |
Table 3-8 Action > Details > EDIT
|
Category |
Command |
Function |
|---|---|---|
|
Edit |
Clear |
Delete the selected text |
|
Edit |
Clear Display |
Delete all text on the screen |
|
Edit |
Copy |
Copy the selected text into the Clipboard |
|
Edit |
Copy To Buffer 1 |
Copy the selected text to the first internal buffer |
|
Edit |
Copy To Buffer 2 |
Copy the selected text to the second internal buffer |
|
Edit |
Copy To Buffer 3 |
Copy the selected text to the third internal buffer |
|
Edit |
Copy To Buffer 4 |
Copy the selected text to the fourth internal buffer |
|
Edit |
Cut |
Cut the selected text and place it on the Clipboard |
|
Edit |
Paste |
Paste the text in the Clipboard at the cursor location |
|
Edit |
Paste From Buffer 1 |
Paste the text from the first internal buffer |
|
Edit |
Paste From Buffer 2 |
Paste the text from the second internal buffer |
|
Edit |
Paste From Buffer 3 |
Paste the text from the third internal buffer |
|
Edit |
Paste From Buffer 4 |
Paste the text from the fourth internal buffer |
|
Edit |
Select All |
Select all text on the screen |
Table 3-9 Action > Details > VIEW
|
Category |
Command |
Function |
|---|---|---|
|
View |
Keyboard Map |
Display the currently loaded keyboard map |
|
View |
Navigation Bar |
Display the Navigation Bar dialog box so that you can specify whether to display the navigation bar and what items it contains |
|
View |
QuickPads |
Display the Setting - QuickPads dialog box so that you can load, edit, or create QuickPads |
|
View |
HotSpots |
Display the Settings - HotSpots dialog box so that you can load, edit, or create HotSpots |
|
View |
Toggle Status Bar |
Show or hide the status bar |
|
View |
Toolbars |
Display the Settings - Toolbars dialog box so that you can load, edit, or create toolbars |
Table 3-10 Action > Details > TOOLS
|
Category |
Command |
Function |
|---|---|---|
|
Tools |
Go To Bookmark/Page |
Display the Bookmarks/Pages dialog box so that you can specify which recorded host screen to access. |
|
Tools |
Go To Specific Page |
Go to the specified recorded host screen. When you click this command, you are prompted to click the name of the recorded host screen to access. |
|
Tools |
Go To Specific URL |
Go to the specified URL. When you click this command, you are prompted to type or click the name of the URL to access. |
|
Tools |
Learn CASL Macro |
Begin recording a CASL macro. |
|
Tools |
Macro Editor |
Display Macro Editor window. |
|
Tools |
Page Settings |
Display the Page Settings dialog box so that you can rename, preview, assign settings, and perform other tasks related to recorded host screens. |
|
Tools |
Record Pages |
Begin recording host screens. |
|
Tools |
Run CASL Macro Script |
Display the CASL Macro dialog box so that you can run, edit, or create a CASL macro. |
|
Tools |
Start/Stop Blind Key Programming |
Start or stop blind key programming. If blind key programming is not in progress, this command initiates it. If blind key programming is in progress, this command ends it. |
|
Tools |
Trace |
Trace a CASL macro. If you initiate this action after you run the macro, tracing begins at the point at which it was initiated. If you initiate this action before you run the macro, tracing begins when you run the macro. |
|
Tools |
Receive File |
Display the Receive File dialog box so that you can download a file using the currently selected file transfer protocol. |
|
Tools |
Send File |
Display the Send File dialog box so that you can upload a file using the currently selected file transfer protocol. |
Table 3-11 Action > Details > SESSION
|
Category |
Command |
Function |
|---|---|---|
|
Session |
Close Current Window |
Close the active split-screen window |
|
Session |
Connect/Disconnect |
Connect to and disconnects from the host |
|
Session |
Open New Window |
Open a new split-screen window |
|
Session |
Redirect Output |
Redirect host output to a split-screen window |
|
Session |
Reset Connection |
Reset the connection |
|
Session |
Reset Display |
Reset the terminal |
Table 3-12 Action > Details > OPTS
|
Category |
Command |
Function |
|---|---|---|
|
Options |
Global Preferences |
Display the Global Preferences dialog box so that you can specify global options such as whether session changes should be saved automatically |
|
Options |
Session Preferences |
Display the Session Preferences dialog box so that you can specify the icon to use for the session, the mouse actions, the CASL macro to run at session start-up, and the values for CASL variables. |
|
Options |
Session Type |
Display the Session Type dialog box so that you can specify the connection type, terminal or device type, and file transfer protocol to use for this session |
|
Options |
Settings |
Display the Settings dialog box so that you can configure the session |
Table 3-13 Action > Details > WIN
|
Category |
Command |
Function |
|---|---|---|
|
Window |
Arrange Sessions |
Arrange the session windows so that they appear as non-overlapping horizontal or vertical tiles |
|
Window |
Cascade Windows |
Arrange the session windows so that they overlap |
|
Window |
Tile Horizontally |
Arrange the session windows so that they appear as non-overlapping horizontal tiles |
|
Window |
Tile Vertically |
Arrange the session windows so that they appear as non-overlapping vertical tiles |
Table 3-14 Action > Details > HELP
|
Category |
Command |
Function |
|---|---|---|
|
Help |
Help Context-sensitive |
Change the mouse pointer into an arrow with a question mark so that you can access context-sensitive Help for any item on a menu or dialog box |
|
Help |
Help Instructions |
Display instructions on using Help |
|
Help |
Help Topics |
Display the table of contents, index, and full text search facility for Attachmate's InfoConnect products |
|
Help |
Internet Link |
Go to the Attachmate SupportWeb site |
Table 3-15 Action > Details > APP
|
Category |
Command |
Function |
|---|---|---|
|
Application |
Run Application |
Run the specified application or batch fileWhen you click this command, you are prompted to click the name of the application or batch file to run. |
|
Application |
Run Keyboard Map Editor |
Run the Keyboard Map Editor |
|
Application |
Run QuickPad Editor |
Run the QuickPad Editor |
|
Application |
Run Toolbar Editor |
Run the Toolbar Editor |
Table 3-16 Action > Details > SETTINGS
|
Category |
Command |
Function |
|---|---|---|
|
Apply Settings |
Color Settings |
Apply the specified color scheme. When you click this command, you are prompted to click the name of the scheme to apply. |
|
Apply Settings |
HotSpot Settings |
Apply the specified HotSpot scheme. When you click this command, you are prompted to click the name of the scheme to apply. |
|
Apply Settings |
Keyboard Maps |
Load the specified keyboard map. When you click this command, you are prompted to click the name of the keyboard map to load. |
|
Apply Settings |
QuickPads |
Load the specified QuickPad. When you click this command, you are prompted to click the name of the QuickPad to load. |
|
Apply Settings |
Toolbars |
Load the specified toolbar. When you click this command, you are prompted to click the name of the toolbar to load. |
Table 3-17 Action > Details > MACROS
|
Category |
Command |
Function |
|---|---|---|
|
Macros |
Record Macro |
Display the Record Macro dialog box so that you can select recording options |
|
Macros |
Run CASL Macro |
Run the specified CASL macro |
|
Macros |
Run Macro |
Run the specified macro |
|
Macros |
Run Macro Editor |
Run the Macro Editor so that you can create custom macros |
|
Macros |
Stop CASL Macro |
Stop the running CASL macro. If a CASL macro is not currently running, this item is dimmed. |
Table 3-18 Action > Details > MISC
|
Category |
Command |
Function |
|---|---|---|
|
Miscellaneous |
Jump Next Session |
Jump to the next session |
|
Miscellaneous |
Send Keys |
Perform the specified keystrokes. When you click this command, you are prompted to specify the keystrokes to perform. |
Table 3-19 Action > Details > CTRL_KEYS
|
Category |
Command |
Function |
|---|---|---|
|
Control Keys |
Alt |
Perform the function of the ALT key on the PC keyboard |
|
Control Keys |
AltGr |
Perform the function of the ALT GR key on the PC keyboard (this applies only to non-U.S). |
|
Control Keys |
Break |
Perform the function of the BREAK key on the PC keyboard |
|
Control Keys |
Caps Lock |
Perform the function of the CAPS LOCK key on the PC keyboard |
|
Control Keys |
Ctrl |
Perform the function of the CTRL key on the PC keyboard |
|
Control Keys |
Nothing Mapped |
Remove any function from the key |
|
Control Keys |
Num Lock |
Perform the function of the NUM LOCK key on the PC keyboard |
|
Control Keys |
Print Screen |
Perform the function of the PRINT SCREEN key on the PC keyboard |
|
Control Keys |
Scroll Lock |
Perform the function of the SCROLL LOCK key on the PC keyboard |
|
Control Keys |
Shift |
Perform the function of the SHIFT key on the PC keyboard |
|
Control Keys |
SysRq |
Perform the function of the SYS RQ key on the PC keyboard |