The following table lists the T27 keystrokes that you can use while in control mode. For these keystrokes, press and release the first key (CTRL), and then press and release any subsequent keys.
When you see two keys separated by a space, press and release the first key, then press and release the subsequent key(s).
Table 4-46
|
Description |
Keystroke |
|---|---|
|
Moves the cursor to the same location as the Datacomm pointer (DCP). |
CTRL, > |
|
Toggles the cursor location alarm on or off. |
CTRL, ? |
|
Clears all variable tabs. |
CTRL, o |
|
Deletes the character at the cursor location and shifts the remaining characters on the page to the left. In forms mode, this keystroke shifts only the remaining characters in the field to the left. |
CTRL, DELETE |
|
Puts the session in nonforms mode. |
CTRL, q |
|
Disables lowercase characters. |
CTRL, y |
|
Exits search mode. |
CTRL, s |
|
Puts the session GLOSSARY_SESSION in forms mode GLOSSARY_FORMS_MODE. |
CTRL, w |
|
Enables lowercase characters. |
CTRL, t |
|
Puts the session in search mode. |
CTRL, a |
|
Puts the session in insert-in-page mode (nonforms mode only) . |
CTRL, INSERT |
|
Exchanges the line where the cursor is located with the line below. |
CTRL, b |
|
Exchanges the line where the cursor is located with the line above. |
CTRL, v |
|
Prints all data. |
CTRL, ] |
|
Prints all data and adds a form feed at the end of the data. |
CTRL, ; |
|
Prints only the data in unprotected fields and adds a form feed at the end of the data. |
CTRL, : |
|
Moves the cursor to the first column on the screen without displaying the symbol. |
CTRL, ENTER |
|
Rolls the page down. |
CTRL, m |
|
Rolls the page up. |
CTRL, n |
|
Searches for the next occurrence of the specified character. |
CTRL, TAB |
|
Sets the mobile home on the page. This indicates where data transmission will begin, but it does not affect cursor movement. |
CTRL, HOME |
|
Sets or clears a variable tab at the cursor location. |
CTRL, p |
|
Moves the cursor to column c, row r, using ASCII characters. |
CTRL, <, c, r |
|
Moves the cursor to column xx, row yy, using hexadecimal numbers. |
CTRL, @, xx yy |
|
Inserts a line feed at the cursor location |
CTRL, h, ENTER |
|
Starts reverse video. |
CTRL, h . |
|
Starts underlined video. |
CTRL, h / |
|
Starts bright video. |
CTRL, h : |
|
Starts blinking video. |
CTRL, h 8 |
|
Starts secure video. |
CTRL, h 9 |
|
Inserts a protected field delimiter. |
CTRL, h, < |
|
Inserts a left-justified field delimiter. |
CTRL, h, ? |
|
Inserts a right-justified field delimiter. |
CTRL, h, = |
|
Ends all highlights (reverse video, underlined video, bright video, blinking video, secure video). |
CTRL, h, 7 |
|
Inserts an end field delimiter. |
CTRL, h, > |
|
Activates reverse video. |
CTRL, u |
|
Activates normal video. |
CTRL, i |
|
Fills the screen with lowercase z characters. |
CTRL, SPACE, m |
|
Specifies which character (x) to search for (x is case-sensitive). |
CTRL, e, x |
|
Resets the session. |
CTRL, SPACE, d |
|
Displays the ASCII character set. |
CTRL, SPACE, c |
|
Displays the T27 version number. |
CTRL, SPACE, v |