PreviousEBCDIC/ASCII Translation Tables

Appendix C: UNIX Key Usage Chart

Because UNIX terminals vary widely, the keys documented in this manual might not be available on your keyboard. This appendix lists the actual keystrokes required to obtain the keys documented.

It also tells you how to select soft or hard operation for the Alt and Ctrl keys. With soft operation, the Alt or Ctrl key is automatically turned off after the next keystroke. This means that whenever you want a function from the Alt menu you must hold down Alt again to get the Alt menu displayed; and similarly with Ctrl. With hard operation, the Alt and Ctrl keys work in a similar way to the Caps Lock key, in that having been pressed, they remain in effect until pressed again.

The following table lists the available functions, the key documented as resulting in that function, the keystrokes required to obtain the documented functions, and whether the keystroke can be configured (Y) or not (x).

Function Documented
Key
Mapped To Configurable
Alternate Menu (soft) Alt /a Y
Alternate Menu (hard) Alt /x Y
Control Menu (soft) Ctrl /c Y
Control Menu (hard) Ctrl /z Y
/ / // Y
Escape Escape /@ Y
F1 F1 /1 x
F2 F2 /2 x
F3 F3 /3 x
F4 F4 /4 x
F5 F5 /5 x
F6 F6 /6 x
F7 F7 /7 x
F8 F8 /8 x
F9 F9 /9 x
F10 F10 /0 x
F11 F11 /- x
F12 F12 /= x
Backspace Backspace /b Y
Backtab Backtab /T Y
Caps Lock (upper case) Caps Lock /u Y
Delete Del /d Y
End End /e Y
Help F1 /? Y
Home Home /h Y
Insert Ins /i Y
Interrupt Ctrl+Break User defined (see Note 2) N/A
Left Shift Shift /l Y
Maphelp   /m Y
Num Lock Num Lock /# Y
Page Up Page-Up /p Y
Page Down Page-Down /n Y
Refresh Refresh /| Y
Right Shift Shift /r Y
Scroll Lock Scroll /s Y
Tab Tab /t Y

Notes:

  1. Tab is the only case-sensitive keystroke. By default, lower-case Tab (/t) provides Tab, with upper-case Tab (/T) providing Backtab.

  2. The interrupt key can be defined as follows:
    stty intr ^C
  3. If your hardware can detect the Alt and Ctrl keys being depressed on their own, you can use the run-time configuration tunable detect_alt_ctrl. (See the chapter Run-time Configuration.) In this case, each key press is reassigned and the mapped key strokes are not used.

  4. The keystrokes listed above are those set up by default for your system. Those functions with a check mark (Y) in the column headed Configurable can have their associated keystroke mapped onto a keystroke of your choice. You can also configure the meta character used, which is / by default.

    To change the defaults, create the file adiskey.map and enter your choice of keys. (An example file, adiskey.xxx is supplied with this system.) On startup, your COBOL system searches for adiskey.map in the current directory, then in the directory specified by the COBDIR environment variable. If it is not found the defaults are used. The following is an example adiskey.map file:

    * Micro Focus ADISKEY keyboard mapping file. Keystrokes are 
    * case insensitive except for TAB which uses Upper-Case-Tab 
    * for the Back-Tab function. An asterisk denotes a comment. 
    * This file shows the default keyboard mapping
    
             Meta-Char   is "/"
             Soft-Alt    is "a"
             Soft-Ctrl   is "c"
             Hard-Alt    is "x"
             Hard-Ctrl   is "z"
             Left-Shift  is "l"
             Right-Shift is "r"
             Caps-Lock   is "u"
             Num-Lock    is "#"
             Scroll-Lock is "s"
             Insert      is "i"
             Delete      is "d"
             Backspace   is "b"
             Home        is "h"
             End         is "e"
             Page-Up     is "p"
             Page-Down   is "n"
             Tab         is "t"
             Escape      is "@"
             Map-Help    is "m"
             Help        is "?"
             Refresh     is "|"


Copyright © 2000 MERANT International Limited. All rights reserved.
This document and the proprietary marks and names used herein are protected by international law.

PreviousEBCDIC/ASCII Translation Tables