Previous Topic Next topic Print topic


VTAM Worksheet

Have a VTAM systems programmer complete this worksheet. Record your values in the space provided. Where suggested values are given, verify that your settings in VTAM match the suggested values.

Key

Note:

For VTAM, the minimum level is 3.2.

NCP is not required by XDB Link, but it must be at least version 4.2 if it is used.

TCP SNA Parameter Suggested Value Your Value Ref
  R PU Definition
DLOGMOD=ANY3270
XID=YES 
PUTYPE=2 
STATOPT='XDB SAMPLE'

Accept system default for all other values

  A1
  R PU Address

Used by SNA software on the PC

    A2
  R PU CP Name

Used by SNA software on the PC

    A3
  R IDNUM

Used by SNA software on the PC

    A4
  R IDBLK

Used by SNA software on the PC

05D for 3172 device   A5
  R LU6.2 Mode Entry

(MODEENT ID)

May be used by SNA software on the PC

Use IBMRDB or the following:
TYPE = X'00' 
FMPROF = X'13' 
TSPROF = X'07' 
PRIPROT = X'B0'  
SECPROT = X'B0' 
COMPROT = X'50B1' 
RUSIZES = X'8989' 
PSERVIC = X'060200000000000000002F00'
  A6
  R LU Name for LU6.2 Terminals

Used by SNA software on the PC

XDBLU621 LU LOCADDR=0,MODETAB=RDBMODES, 
RESSCB=20
  A7
  I LU Name for 3270
XDB32701 LU LOCADDR=02, 
		  LOGAPPL=your3270mode
  A8
R R DB2 APPLID

Used by SNA software on the PC

See the IBM Manual Distributed Relational Database Connectivity Guide.

AUTH=(ACQ) 
AUTOSES=1 
SECACPT=ALREADYV 
SRBEXIT=YES 
VERIFY=NONE 
VPACING=2 
		  

See your DB2 Administration Guide for other values

  A9
R   TCP for APPLID, required only if using XDB Link Host Option.
APPL=YES, 
AUTH=(ACQ), 
DLOGMOD=IBMDB2LM, 
DMINWNL=10, 
DSESLIM=20, 
SECACPT=ALREADYV, 
SRBEXIT=YES, 
VPACING=8
  A10

Please return this worksheet to the XDB Link Installation Coordinator.

Previous Topic Next topic Print topic