Additional Software Requirements for Micro Focus Enterprise Developer Unix Components

To ensure full functionality for some Enterprise Developer features, you might be required to obtain and install additional third-party software in addition to the prerequisite software installed automatically by the Enterprise Developer setup file. The following information specifies the third-party software required for each feature.

Application server JCA support for Enterprise Server

Back to Top

Java EE 7, including support for EJB 3.2 and Java Connector Architecture 1.7, is supported for the deployment of EJBs.

The following Java application servers are supported using the following JDKs:

Application Servers JDK (vendor) Java EE COBOL RA CICS RAs and ECI
JBoss EAP 7.1.4 1.8 (Oracle)

1.8 (AdoptOpenJDK)1

7 X X
Oracle WebLogic 12.2.1 1.8 (Oracle) 7 X
IBM WebSphere 9.0 1.8 (IBM) 7 X X
Tomcat 9.0.x2 1.8 (AdoptOpenJDK)
1JBoss EAP 7.1.4 restricts support of AdoptOpenJDK to Red Hat Enterprise Linux platforms. For more information, see the Red Hat Web site for supported configurations.

2Apache Tomcat is an HTTP server and servlet container supporting Java Servlet and JavaServer Pages (JSP). Micro Focus Tomcat non-transactional support includes servlet generation with J2SE Beans; no transactional support is provided. Tomcat does not support the use of Enterprise Java Beans (EJBs) or resource adapters (RAs).

Please consult your Application Server documentation to determine which JDK you should use. The JDK is used to:

  • Start the Application Server
  • Compile EJBs and Servlets generated by the Interface Mapping Toolkit or the imtkmake command

After installing the JDK, you need to set up your Java environment.

The availability of COBOL and CICS resource adapters for these Application Servers differs between UNIX platforms. The following table indicates where support is available for each platform:

Feature/Platform JBoss EAP 7.1.4 WebSphere 9.0 WebLogic 12.2.1 Tomcat 9.0.x1
AIX 7.1 on RS6000 64-bit3 64-bit3 64-bit 64-bit
HP/UX 11.31 on Intel IA64 64-bit3 64-bit3 64-bit 64-bit
Red Hat EL 6.2 on IBM390 64-bit3 64-bit3 64-bit 64-bit
Red Hat EL 6.1 on x86-64 64-bit3 64-bit 3 64-bit 64-bit
Solaris 11.3 on AMD Opteron 64-bit3 64-bit 3 64-bit
Solaris 11.3 on SPARC 64-bit3 64-bit 3 64-bit
SUSE SLES 12 SP2 on IBM390 64-bit2,3 64-bit3 64-bit 64-bit
SUSE SLES 12 SP2 on AMD x86-64 64-bit2,3 64-bit3 64-bit 64-bit
SUSE SLES12 on PowerLinux LE 64-bit
1Apache Tomcat is an HTTP server and servlet container supporting Java Servlet and JavaServer Pages (JSP). Micro Focus Tomcat non-transactional support includes servlet generation with J2SE Beans; no transactional support is provided. Tomcat does not support the use of Enterprise Java Beans (EJBs) or resource adapters (RAs).

2JBoss EAP 7.1.4 not listed as tested by RedHat on this platform.

3Supports both COBOL and CICS resource adapters. Also supports ECI.

CICS Web Services

Back to Top

To use CICS Web Services, you must first install the IBM CCSID conversion tables. See Install and Configure CCSID Conversion Tables for details.

Java Development Kit (JDK)

Back to Top

For COBOL JVM code and Java Interoperability, Java 8 (32 or 64-bit versions), and Java 11 (64-bit version only) are supported. Alternatively, you can download AdoptOpenJDK's OpenJDK 8 with Hotspot from AdoptOpenJDK's Web site and unpack the archive anywhere on your machine.
Note: Eclipse does not run using Java 11.

Database Access

Back to Top

Before you can use Enterprise Developer to develop and deploy SQL applications that use COBSQL, HCO for DB2 LUW, or OpenESQL, ensure any third-party software prerequisites are installed and the environment is set properly.

Database Access - COBSQL (Pro*COBOL)

Back to Top

Note: COBSQL (Pro*COBOL) is supported for native COBOL only.
Availability
Feature/Platform 32-bit 64-bit
x86-64 running Red Hat Linux X X
x86-64 running SUSE Linux X X
IBM System p running AIX X X
IBM System z running Red Hat Linux X X
IBM System z running SUSE Linux X X
Itanium running HP-UX X X
x86-64 running Solaris X X
SPARC running Solaris X X
XA Switch Module
The Oracle XA switch module is provided for COBSQL (Pro*COBOL), and is available on the same platforms as are indicated in the Availability section above.
Certification of RDBMS Precompilers for Native COBOL
Certification of RDBMS precompilers with Micro Focus products is the responsibility of the RDBMS vendor, rather than Micro Focus. Certification information can be found within the relevant Oracle documentation. If you have an Oracle MetaLink account (http://metalink.oracle.com), document # 43208.1 provides details of all language compilers certified by Oracle for use with their precompilers.
Preprocessors
COBSQL supports the following database preprocessors:
  • Oracle Pro*COBOL Version 12.2 and 18c database preprocessors
  • Sybase Open Client Embedded SQL/COBOL Version 11.1 or later
  • Informix Embedded SQL/COBOL Version 7.3 or later
Compiling
On x86 and x86-64 platforms, when compiling with COBSQL for use with Oracle, do not use the COBSQL directive option NOMAKESYN, since this directive results in COMP host variables, and on Intel platforms these are incompatible with the native byte order expected by Oracle.
Testing
For this version, COBSQL was tested with Oracle 12.2 and 18c.

Database Access - HCO for DB2 LUW

Back to Top

Note: HCO for DB2 LUW is supported for native COBOL only.
Availability
Feature/Platform Native COBOL 32-bit Native COBOL 64-bit PL/I 32-bit PL/I 64-bit
x86-64 running Red Hat Linux X X X X
x86-64 running SUSE Linux X X X X
IBM System p running AIX X X X
IBM System z running Red Hat Linux X X
IBM System z running SUSE Linux X X
Itanium running HP-UX X
x86-64 running Solaris
SPARC running Solaris X X X X
PowerLinux LE running Red Hat Linux X
PowerLinux LE running SUSE Linux X
XA Switch Module
The DB2 XA switch module is provided and is available on the same platforms as are indicated in the Availability section above.
Certification of RDBMS Precompilers for Native COBOL
Certification of RDBMS precompilers with Micro Focus products is the responsibility of the RDBMS vendor, rather than Micro Focus. You can find IBM document certification information for DB2/COBOL applications within the IBM Information Center for DB2, in the topic Support for database application development in COBOL.
Preprocessor
HCO for DB2 LUW supports the following database preprocessors:
  • IBM DB2 LUW Version 10.5 or later
  • IBM DB2 Connect Version 10.5 or later
Host Compatibility Option (HCO)
Host Compatibility Option requires that you have one of the following software products installed and configured:
  • IBM Database Connect
  • IBM DB2 LUW Personal Edition or DB2 Express-C
  • DB2 LUW Workgroup or Enterprise Edition

You must also install the DB2 Application Development Client (formerly called DB2 SDK) or you will not be able to compile any DB2 programs.

Testing
For this version, HCO for DB2 LUW was tested with versions 10.5 and 11.1.

JCL Support - DSNREXX

Back to Top

Note: This is a technology preview feature only. It is being made available to allow you to test and provide feedback on this new capability; however, this feature is not intended for production use and it is not supported as such.
Availability
Feature/Platform 32-bit 64-bit
x86-64 running Red Hat Linux X X
x86-64 running SUSE Linux X X
IBM System p running AIX X X
OpenESQL
DSNREXX is supported in OpenESQL applications, and is native code using ODBC. See the Database Access - OpenESQL section in this topic for additional software requirements, and the DSNREXX Support topics for complete details.
Testing
For this release, DSNREXX was tested with DB2 LUW 10.5.

Database Access - Mainframe Batch Database Tools (MBDT)

Back to Top

Availability
Feature/Platform 32-bit 64-bit
x86-64 running Red Hat Linux X X
x86-64 running SUSE Linux X X
IBM System p running AIX X X
OpenESQL
The MBDT toolset consists of OpenESQL applications, and are native code using ODBC. Please see the Database Access - OpenESQL section for further details.
Testing
For this release, MBDT was tested with DB2 LUW 10.5 and Oracle 12.2.

Database Access - OpenESQL

Back to Top

COBOL Availability
Feature/Platform Native COBOL 32-bit Native COBOL 64-bit
x86-64 running Red Hat Linux X X
x86-64 running SUSE Linux X X
x86-64 running Solaris X X
IBM System p running AIX X X
IBM System z running Red Hat Linux X X
IBM System z running SUSE Linux X X
Itanium running HP-UX X X
SPARC running Solaris X X
PowerLinux LE running SUSE Linux X
PowerLinux LE running Red Hat Linux X
PLI Availability
Feature/Platform PL/I 32-bit PL/I 64-bit
x86-64 running Red Hat Linux X X
x86-64 running SUSE Linux X X
IBM System p running AIX X
SPARC running Solaris X X
XA Switch Module
The ODBC One-phase Commit switch module is provided and is available on the same platforms as are indicated in the COBOL Availability section above.

The PostgreSQL switch module is available on the following platforms:

  • x86-64 running Red Hat Linux
  • x86-64 running SUSE Linux
Native COBOL and PL/I
  • OpenESQL supports access to relational databases using ODBC 3.0-compliant drivers
  • Refer to your driver vendor's documentation to determine whether your driver is suitable for use with OpenESQL
Testing
For this version, OpenESQL was tested with:
  • Oracle 12.2 and 18c
  • DB2 LUW 10.5 and 11.1
  • SQL Server 2012, 2014, 2016, and 2017
  • PowerLinux LE using DB2 LUW 10.5 only
  • EDB PostgreSQL 10.5 and MySQL 5.7 (5.3 ODBC drivers only) on the following platforms:
    • x86-64 running Red Hat Linux
    • x86-64 running SUSE Linux
Note: Micro Focus provides compatibility for PostgreSQL and MySQL but does not directly contribute to or support either open source project. Any issues relating to the functionality of either DBMS should be addressed through an open source support vendor.
Planned
Support for the following is planned for future release:
  • SQL Server 2017
  • Amazon Aurora PostgreSQL-Compatible Edition

Both running on the following platforms:

  • x86-64 running Red Hat
  • x86-64 running SUSE Linux

WebSphere MQ

Back to Top

IBM WebSphere MQ version 7 and later.