Resource Classes for JES Security

The table below defines the name of each default resource class used in Enterprise Server for JES security, its meaning, the type of resource entities it contains, and the minimum permission that a user requires on the entities.

DATASET
JES relation Entities ACCESS LEVEL
Controls use of a dataset; it verifies that a user has access to a dataset. Files None, Read, Update, Alter
Access to the list of datasets in ESMAC

See the DATASET usage notes section below.

nodename.userid
NONE
Allows no access.
READ
Allows user to view the datasets list.
UPDATE|CONTROL|ALTER
Allows user to view and delete and create datasets.
JESINPUT
JES relation Entities ACCESS LEVEL
Conditional access support for commands or jobs entered into the system through a JES input device.  INTRDR = Jobs submitted via Internal Reader as a result of executing JCL.

STCINRDR=Jobs submitted via Internal Reader as a result of the execution of a CICS or IMS transaction.

TSUINRDR = Jobs submitted via the ESMAC JES "Control" page and/or the cassub command line interface.

None, Read
JESJOBS
JES relation Entities ACCESS LEVEL
Controlling the submission and cancellation of jobs by job name.
CANCEL
localnodeid.userid.jobname    (for job cancellation authority)
SUBMIT
localnodeid.jobname.userid  (for job submissions)
Where localnodeid is the name of the enterprise server.

These rules are not typically used, but they do provide granularity of control for those environments with special requirements.

NONE
Allows no access.
READ
Allows user to submit jobs
UPDATE
Equivalent to READ.
CONTROL
Equivalent to UPDATE.
ALTER
Allows jobs to be cancelled.
JESSPOOL
JES relation Entities ACCESS LEVEL
Controlling access to job datasets on the JES spool (Joblog, SYSOUT and Messages). localnodeid.userid.jobname.jobid.dsnumber.name

Where:

localnodeid
The name of the enterprise server
dsnumber
The relative dataset number for the job, for exmple, 001
name
The dd name.

These rules are not typically used, but they do provide granularity of control for those environments with special requirements.

Note: In a PAC environment, the enterprise server name must be in parenthesis and prefixed by the PAC name. For example, the following rule trace below specifies EXACLUS as the PAC name and EXACLUS1 is the enterprise server name:
EXACLUS1 ESFEM1030I ESM1: MLDAP ESM: SYSAD AUTH request for "EXACLUS(EXACLUS1).SYSAD" in JESSPOOL denied by rule "EXACLUS(EXACLUS1).**"
NONE
Allows no access.
READ
Allows user to view the spool dataset, but not change its attributes. For example, this does not allow the following keywords on the OUTPUT command: NOKEEP, NOHOLD, DELETE, NEWCLASS, and DEST.
UPDATE
Allows to update a spool dataset.
CONTROL
Equivalent to UPDATE.
ALTER
Allows any operand specified on the TSO OUTPUT command, including deleting and printing. Also, when specified for a discrete profile, allows the user to change the profile itself.
PHYSFILE
JES relation Entities ACCESS LEVEL
Controls creation of a physical file.

See PHYSFILE usage notes section for more information.

Physical files None, Alter
SURROGAT
JES relation Entities ACCESS LEVEL
JES Class for controlling access to job submission by surrogates.  If UserA wants to submit a job to run as UserB then he must have "Read" access to the SURROGAT class for entity UserB.SUBMIT execution-userid .SUBMIT

For example, if USERA is USERB's surrogate, Enterprise Server will check that USERA has read access for the entity, USERB.SUBMIT in the SURROGAT class.

None, Read

DATASET usage notes

Access rights to files within the dataset are enforced if you have a mainframe dialect Compiler directive set. To ensure that security is also applied if you are not using a mainframe dialect, set the FCDCAT and ASSIGN"EXTERNAL" compiler directives, then ensure files are not assigned dynamically or statically in a SELECT statement.

When security is enabled, and a JCL job is submitted that uses a PROC or INCLUDE file that is part of a cataloged Partitioned Dataset (PO), READ access for the dataset is checked. If the user does not have permission to read the dataset, an error is reported.

When security is enabled, and a JCL job is submitted that includes either JOBLIB or STEPLIB entries, the system checks that the user has READ access to each of the Partition Datasets (PO). If the user does not have the required access, the job abends with a COND CODE of S913.

A user that submits jobs must have permission to READ the JCL job file that is being submitted. This is an important security check as it prevents a user from submitting files as JCL jobs when they do not have permission to read those files.

The rule that covers this will also need to cover the reading of a dataset created for the INTRDR submission. It may be that different rules are required as there is a difference between use of the cassub -j command, which will produce a temporary file, and cassub -x, which will pass the whole path and name of the file. The INTRDR cassub command uses the -x option and passes the whole path and name of the dataset.

If the rule that allows the user submitting the job to read the JCL file is based on group membership, the default group of the user submitting the JCL must be one of the groups that allows read access. A user who is a member of one of the groups but does not have a default group set in their security profile must specify the group they are using when they submit the JCL file. That group information cannot be passed through as a property of an INTRDR job generated from the submitted JCL. So the user must specify a default group in their profile which will be used when the check for read permission is made.

To view the catalog, it is necessary for the logged-on user to have access to the DATASET resource. You can achieve this with a nodename.userid resource format entry, for example, MSSDEMO.MyJESusr.

An example LDIF definition for DATASET can be found in the es_default_ldap.ldf file, which is available from the bin directory of your product installation directory.

PHYSFILE usage notes

The PHYSFILE security class controls creation of physical files, including spool files. It is checked when a file is created or renamed. It is not required that the PHYSFILE class is implemented, and if the PHYSFILE class does not exist, access is permitted. Note that in this case, an access check is still made (and if the Security Auditing feature is enabled, an access-denied audit record will be generated, unless the allow unknown resources option is enabled in the security configuration), but the JES engine treats a security result of "denied because resource class undefined" as an "allow" result.

Micro Focus strongly recommends implementing PHYSFILE rules to restrict where datasets may be created, so that datasets are only created in locations that are within the system working set. This will prevent users from specifying an inappropriate location.

Relationship with DATASET

The DATASET class is used to verify that a user can access a dataset in a given way - read, write, create, or delete a dataset - and is checked each time the dataset is accessed. The PHYSFILE class is only checked at dataset creation, and is used to verify that the user can create a dataset in that location.

Relationship with JESSPOOL

Spool files are also datasets, and the PHYSFILE check will be made when these are created to verify that the user who is running the JCL job can create the spool files in the given location. The JESSPOOL security class is used to verify that a user can access the spool files that have been created by a job.

The user id used to submit and run the job must have authority to create the job log files. These are spool files that will be created in the spool files location, and so a PHYSFILE rule to allow access to this location would be required.

Below is an example LDIF definition for PHYSFILE.

Micro Focus suggests allowing all users access to defined areas, and restrict certain areas to certain users. Allocation override rules can be used in combination with PHYSFILE settings to mandate where datasets are created, based on catalog properties, and who has permission to create them.

Example

In the following examples it is assumed that all datasets are to be created in an area on disk called C:\WORKAREA. The definition of rules that allows access to specific areas implicitly denies access to areas not covered by the rules:

######################### 
# RACF Class = PHYSFILE # 
#########################
dn:CN=PHYSFILE, CN=PHYSFILE,CN=Enterprise Server Resources,CN=Micro Focus,CN=Program Data,DC=local
changetype: add
objectClass: top
objectClass: container 
description: JES Class for controlling access to physical files


################################### 
# ALLOW ALL USERS PERMISSION TO   #
# CREATE FILES IN THE DATA AREA   # 
###################################

dn:CN=C\3A\\WORKAREA\\DATA\\**,CN=PHYSFILE,CN=Enterprise Server Resources,CN=Micro Focus,CN=Program Data,DC=local
changetype: add
objectClass: microfocus-MFDS-Resource
microfocus-MFDS-Resource-Class: PHYSFILE
microfocus-MFDS-Resource-ACE: allow:*:alter
microfocus-MFDS-UID: no
description: Allow everyone permission to create a physical file in the DATA area

################################### 
# IF SPOOL FILES ARE HELD IN A    #
# DIFFERENT LOCATION ALLOW ALL    #
# USERS PERMISSION TO CREATE      #
# FILES IN THE SPOOL AREA         # 
###################################
dn:CN=C\3A\\WORKAREA\\SPOOL\\**,CN=PHYSFILE,CN=Enterprise Server Resources,CN=Micro Focus,CN=Program Data,DC=local
changetype: add
objectClass: microfocus-MFDS-Resource
microfocus-MFDS-Resource-Class: PHYSFILE
microfocus-MFDS-Resource-ACE: allow:*:alter
microfocus-MFDS-UID: no
description: Allow everyone permission to create job logs and spool fiels in the SPOOL area

#################################### 
# LIMIT ACCESS TO THE MFI01 FOLDER #
# TO AUTOUSER                         # 
####################################
dn:CN=C\3A\\WORKAREA\\MFI01\\**,CN=PHYSFILE,CN=Enterprise Server Resources,CN=Micro Focus,CN=Program Data,DC=local
changetype: add
objectClass: microfocus-MFDS-Resource
microfocus-MFDS-Resource-Class: PHYSFILE
microfocus-MFDS-Resource-ACE: allow:AUTOUSER:alter
microfocus-MFDS-UID: no
description: Allow AUTOUSER permission to create datasets in the MFI01 folder

##################################### 
# PHYSICAL FILES IN XYZ FOLDER      #
# THIS SHOWS RESTRICTING USE OF A   #
# FOLDER AND SUB-FOLDERS TO A GROUP #
#####################################
dn:CN=D\3A\\WORKAREA\\XYZ\\**,CN=PHYSFILE,CN=Enterprise Server Resources,CN=Micro Focus,CN=Program Data,DC=local
changetype: add
objectClass: microfocus-MFDS-Resource 
microfocus-MFDS-Resource-Class:PHYSFILE 
microfocus-MFDS-Resource-ACE: allow:ALLUSER group:alter
microfocus-MFDS-UID: mfuid