! A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
-s Rebuild option | PG to File Handling | 7.3 |
/S RTS switch | User's Guide | 13.2 |
S RTS switch | User's Guide | 13.2 |
s RTS switch | User's Guide | 13.2 |
S2 RTS switch | User's Guide | 13.2 |
S3 RTS switch | User's Guide | 13.2 |
S5 RTS switch | User's Guide | 13.2 |
S6 RTS switch | User's Guide | 13.2 |
SAA Compiler directive | User's Guide | 6.3 |
SAME AREA clause | Language Reference | 6.1.3.3 , 6.1.3.3 |
SAME clause | Language Reference | 6.1.3.3 , 6.1.3.3 , 6.1.3.3 |
SAME RECORD AREA clause | Language Reference | 6.1.3.3 , 6.1.3.3 , 15.1.5 , 15.1.5 , 16.1.13 , 16.1.13 , 16.1.13 |
same_proc_excl_detection run-time tunable | User's Guide | 12.3 |
Sample program | Dialog System CMUG | 3.2.1 |
Sample programs | PG to Creating UIs | 16.6 | |
Getting Started | 1.4 | ||
admouse | PG to Creating UIs | 8.1 | |
ccicli.cbl | PG to Communications | 2.7 | |
cciserv.cbl | PG to Communications | 2.7 | |
ccitab.cpy | PG to Communications | 2.7 | |
compress | PG to Creating UIs | 16.6 | |
funkey.cbl | PG to Creating UIs | 2.3 | |
intrins.cbl | PG to Writing Programs | 2.3 | |
mudemo | PG to File Handling | 6.9 | |
p2hello1 | PG to Creating UIs | 20.3.5.1 | |
p2hello1 description | PG to Creating UIs | 20.3.5.3 | |
p2hello1 listing | PG to Creating UIs | 20.3.5.2 | |
p2hello1.cbl | PG to Creating UIs | Ch20 , 20.3 , 20.3.1 , 20.3.1 , 20.3.5 | |
pan2link.cpy | PG to Creating UIs | 20.2.5 , 20.2.5.1 , 20.3.1 , 20.3.1 , 20.3.1 , 20.3.1 , 20.3.2 , 20.3.3.1 , 20.3.5.3 | |
panbigsc | PG to Creating UIs | 2.6.5 | |
panbordr | PG to Creating UIs | 2.6.5 | |
pandemo.cbl | PG to Creating UIs | 2.6.3 | |
panlink.cpy | PG to Creating UIs | 2.6.4 | |
pantutor | PG to Creating UIs | 2.6.5 | |
popup.cbl | PG to Creating UIs | 2.5 | |
Presentation Manager | PG to Creating UIs | 14.5 , 15.6 | |
sharing files | PG to File Handling | 6.9 | |
smlaccp.cbl | PG to Creating UIs | 2.2.2 | |
sysmets | PG to Creating UIs | 16.6 | |
winhello | PG to Creating UIs | 16.6 |
Sample Session | |||
Character Mode | Dialog System CMUG | Ch3 |
Sample session | Getting Started | Ch4 |
SAS | Dialog System CMUG | 10.1.1.13 , 20.2 |
Save | |||
action bar | Dialog System CMUG | 6.3.2 | |
Keybcf definitions | PG to Creating UIs | 7.2.2.3 |
Save Analysis | Character Tools | 3.2.2.7 |
Save in Screens | |||
file | PG to Creating UIs | 9.2.4.2 | |
menu | PG to Creating UIs | 9.2.3.12 |
Save menu | |||
Adiscf | PG to Creating UIs | 5.2.2.19 |
Save screenset | Dialog System CMUG | 4.2.4 |
Saving a screenset | Dialog System CMUG | 3.1.3 |
Saving memory in Forms-2 | Character Tools | 8.2.4.3 |
SB | Dialog System CMUG | 10.1.1.11 , 20.2 |
SBCS | LR - Additional Topics | 4.2 , 4.15.1.1 , Ch5 |
SBOD | Dialog System CMUG | 10.1.1.12 , 20.2 |
Scale Up/Down | Character Tools | 3.2.2.4.3 |
Scope terminators | Language Reference | 2.6.6.4 , 3.5.4.8 |
Screen | |||
appearance of characters | PG to Creating UIs | Ch26 | |
attributes | PG to Creating UIs | Ch26 , 26.2.4.5 | |
colors | PG to Creating UIs | Ch26 | |
configuration | Getting Started | 1.4 | |
handler | Getting Started | 1.4 | |
large with Adis | PG to Creating UIs | 4.2.5 | |
output recording | Character Tools | 2.5.2.2 , 12.3.2 | |
painter | Getting Started | 1.4 | |
printing | User's Guide | 15.2.3.4.2 | |
recording multiple output screens | Character Tools | 12.3.2.2 | |
selecting type in Forms-2 | Character Tools | 8.2.3.1.1 |
Screen attributes | PG to Creating UIs | 25.2 | |
encoding | PG to Creating UIs | 25.2.4 | |
IBM | PG to Creating UIs | 26.2.4 |
Screen definitions | PG to Creating UIs | 4.1.2 |
Screen description | Language Reference | 9.1.1 |
Screen description entry | Language Reference | 9.1.1 , 9.1.1.1 |
Screen design | Getting Started | 1.4 |
Screen display | |||
performance | User's Guide | 15.2.2.3.2 |
Screen emulation mode | PG to Creating UIs | 16.3.3.1 |
Screen files | Character Tools | 12.3.3 |
Screen function in Screens | |||
name | PG to Creating UIs | 9.2.4.2 | |
to Editor | PG to Creating UIs | 9.2.4.2 |
Screen group functions | |||
array size | Dialog System CMUG | 10.1.1.13 | |
data positioning | Dialog System CMUG | 10.1.1.12 | |
insertion and deletion | Dialog System CMUG | 10.1.1.14 | |
procedure | Dialog System CMUG | 10.1.1.15 |
Screen handling | Language Reference | 1.1 , 9.1.1 | |
ANSI ACCEPT/DISPLAY | PG to Creating UIs | 1.1.10 | |
column specification | Compatibility Guide | 7.2.11 | |
comparison of methods | PG to Creating UIs | Ch1 | |
configuration | Compatibility Guide | 5.1 | |
Dialog System | PG to Creating UIs | 1.1.1 , 1.1.1 , 1.1.2 | |
enhanced ACCEPT/DISPLAY | PG to Creating UIs | 1.1.9 , 1.1.11 | |
low level routines | PG to Creating UIs | 1.1.11 | |
Microsoft COBOL 2.2 | Compatibility Guide | 2.3.7 | |
Panels | PG to Creating UIs | 1.1.7 , 1.1.7 , Ch11 | |
Screen Section | PG to Creating UIs | 1.1.8 | |
scrolling | Compatibility Guide | 2.3.7.6 | |
using Adis | PG to Creating UIs | 4.1.1 |
Screen handling portability | PG to Writing Programs | 5.1.6.3 |
Screen image | |||
files in Forms-2 | Character Tools | 8.2.1.5 , 8.2.8 | |
Forms-2 | Character Tools | 8.2 |
Screen item | Language Reference | 9.1.1 , 9.1.1 , 9.1.1 |
Screen layout | |||
Forms-2 translates to COBOL | Character Tools | 8.2 | |
using Enhanced ACCEPT/DISPLAY | Character Tools | Ch8 | |
using Forms-2 | Character Tools | Ch8 | |
verification | Character Tools | 8.2 |
Screen options | Language Reference | 9.1.1 |
Screen output | |||
hardware dependency | User's Guide | 15.2.3.4.4 | |
optimization in Windows | PG to Creating UIs | 16.3.3.3 |
Screen output recording | Character Tools | 12.3.2 | |
multiple screens | Character Tools | 12.3.2.2 |
Screen Painter | PG to Creating UIs | 2.4 |
Screen read | |||
on non-FED terminals | PG to Creating UIs | 4.2.8 |
Screen routines | |||
CBL_CLEAR_SCR | PG to Creating UIs | 3.2 | |
CBL_GET_CSR_POS | PG to Creating UIs | 3.2 | |
CBL_GET_SCR_SIZE | PG to Creating UIs | 3.2 | |
CBL_READ_SCR_ATTRS | PG to Creating UIs | 3.2 | |
CBL_READ_SCR_CHARS | PG to Creating UIs | 3.2 | |
CBL_READ_SCR_CHATTRS | PG to Creating UIs | 3.2 | |
CBL_SET_CSR_POS | PG to Creating UIs | 3.2 | |
CBL_SWAP_SCR_CHATTRS | PG to Creating UIs | 3.2 | |
CBL_WRITE_SCR_ATTRS | PG to Creating UIs | 3.2 | |
CBL_WRITE_SCR_CHARS | PG to Creating UIs | 3.2 | |
CBL_WRITE_SCR_CHARS_ATTR | PG to Creating UIs | 3.2 | |
graphics characters, get | PG to Creating UIs | 24.3.1 | |
line draw characters, get | PG to Creating UIs | 24.3.1 | |
redirectable console I/O | PG to Creating UIs | 3.2 |
screen routines | |||
CBL_WRITE_SCR_CHATTRS | PG to Creating UIs | 3.2 | |
CBL_WRITE_SCR_N_ATTR | PG to Creating UIs | 3.2 | |
CBL_WRITE_SCR_N_CHAR | PG to Creating UIs | 3.2 | |
CBL_WRITE_SCR_N_CHATTR | PG to Creating UIs | 3.2 | |
CBL_WRITE_SCR_TTY | PG to Creating UIs | 3.2 | |
cursor-type, set | PG to Creating UIs | 3.2 |
Screen Section | LR - Additional Topics | 12.2.2 | |
Compatibility Guide | 2.3.7.3 | ||
Language Reference | 9.1.1 | ||
locating | Character Tools | 5.4 |
Screen section | PG to Creating UIs | 1.1.8 , 2.4.1 , 4.1.2 | |
ACCEPT/DISPLAY | PG to Creating UIs | 4.2.3 , 4.2.3 | |
clause in Screens | PG to Creating UIs | 9.2.5 | |
need for non-edited fields | PG to Creating UIs | 4.2.3 | |
numeric-edited fields | PG to Creating UIs | 4.2.3 |
Screen size | |||
43-lines switch | User's Guide | 13.2 | |
50-lines switch | User's Guide | 13.2 | |
large | User's Guide | 13.2 | |
nonstandard | User's Guide | 13.2 |
Screen type | PG to Creating UIs | 3.2 |
Screen-names | |||
counting | Character Tools | 5.3.4 |
SCREENPAGE Animator directive | Character Tools | A.2.1 |
Screens | PG to Creating UIs | 2.4 , Ch9 , 9.2.3.7 | |
Character Tools | 2.5.1 | ||
accept order character | PG to Creating UIs | 9.2.4.2 | |
accept order of groups | PG to Creating UIs | 9.2.4.2 | |
accepting fields | PG to Creating UIs | 9.2.4.2 | |
accessing functions | PG to Creating UIs | 9.2.4.1 | |
advanced-IDX, differences between IDX | PG to Creating UIs | 9.2.4.2 | |
altering input field acceptance order | PG to Creating UIs | 10.1.7 | |
alternate keys - changing | PG to Creating UIs | 9.2.7.4 | |
Alternate menu | PG to Creating UIs | 9.2.3.1 | |
and the COBOL Editor | PG to Creating UIs | 9.1 | |
assigning properties to a group | PG to Creating UIs | 9.2.3.9 | |
assigning properties to groups | PG to Creating UIs | 9.2.4.2 | |
Attribute on the information line | PG to Creating UIs | 9.2.4.2 | |
attributes selection function | PG to Creating UIs | 9.2.4.2 | |
attributes, on and off | PG to Creating UIs | 9.2.4.2 | |
attributes, painting | PG to Creating UIs | 9.2.4.2 | |
attributes, reading | PG to Creating UIs | 9.2.4.2 | |
attributes, set background | PG to Creating UIs | 9.2.4.2 | |
attributes, setting default | PG to Creating UIs | 9.2.4.2 | |
AUTO clause | PG to Creating UIs | 9.2.5 | |
BELL clause | PG to Creating UIs | 9.2.5 | |
BLANK WHEN ZERO clause | PG to Creating UIs | 9.2.5 | |
Block menu | PG to Creating UIs | 9.2.3.3 | |
blocks - restoring | PG to Creating UIs | 9.2.4.2 | |
blocks, copying | PG to Creating UIs | 9.2.4.2 | |
blocks, cut to | PG to Creating UIs | 9.2.4.2 | |
blocks, marking and unmarking | PG to Creating UIs | 9.2.4.2 | |
blocks, pasting | PG to Creating UIs | 9.2.4.2 | |
blocks, restoring | PG to Creating UIs | 9.2.4.2 | |
Clear Screen Function | PG to Creating UIs | 9.2.4.2 | |
color or monochrome display | PG to Creating UIs | 9.2.4.2 | |
compared with Forms- 2 | Character Tools | Ch8 | |
Control menu | PG to Creating UIs | 9.2.3.4 | |
Copy from Block function | PG to Creating UIs | 9.2.4.2 | |
Copy to Block function | PG to Creating UIs | 9.2.4.2 | |
Cut to Block function | PG to Creating UIs | 9.2.4.2 | |
Define Field function | PG to Creating UIs | 9.2.4.2 | |
Define Group function | PG to Creating UIs | 9.2.4.2 | |
defining data | PG to Creating UIs | 10.1.6 | |
defining fields | PG to Creating UIs | 10.1.4 | |
defining groups | PG to Creating UIs | 10.1.5 | |
defining text | PG to Creating UIs | 10.1.6 | |
Delete Field Definition function | PG to Creating UIs | 9.2.4.2 | |
Delete function | PG to Creating UIs | 9.2.7.4 | |
Delete Group Definition function | PG to Creating UIs | 9.2.4.2 | |
Delete Group Horizontally function | PG to Creating UIs | 9.2.4.2 | |
Delete Group Vertically function | PG to Creating UIs | 9.2.4.2 | |
Delete Line function | PG to Creating UIs | 9.2.4.2 | |
designing a form | PG to Creating UIs | 10.1.2 | |
difference between IDX and advanced-IDX | PG to Creating UIs | 9.2.4.2 | |
Directory facility | PG to Creating UIs | 9.2.4.2 | |
displaying special characters | PG to Creating UIs | 9.2.4.2 | |
Draw function | PG to Creating UIs | 9.2.4.2 | |
Draw menu | PG to Creating UIs | 9.2.3.5 | |
Draw mode | PG to Creating UIs | 9.2.4.2 | |
Edit Field Clause function | PG to Creating UIs | 9.2.4.2 | |
Edit Group Clause function | PG to Creating UIs | 9.2.4.2 | |
Erase mode | PG to Creating UIs | 9.2.4.2 | |
error messages | PG to Creating UIs | 9.2.8 | |
exiting | PG to Creating UIs | 9.2.4.2 | |
Field menu | PG to Creating UIs | 9.2.3.6 | |
Field menu popup | PG to Creating UIs | 9.2.5 | |
field order - setting | PG to Creating UIs | 9.2.4.2 | |
field properties | PG to Creating UIs | 9.2.3.6 | |
field, marking | PG to Creating UIs | 9.2.4.2 | |
fields | PG to Creating UIs | 10.1.4 | |
fields in groups | PG to Creating UIs | 9.2.4.2 | |
fields, changing sizes | PG to Creating UIs | 9.2.4.2 | |
forms, loading | PG to Creating UIs | 9.2.4.2 | |
Forms-2 files | PG to Creating UIs | 9.2.4.2 | |
Forms/Forms-2 support | PG to Creating UIs | 9.1 | |
FROM phrase | PG to Creating UIs | 9.2.5 | |
FULL clause | PG to Creating UIs | 9.2.5 | |
functions, accessing | PG to Creating UIs | 9.2.4.1 | |
functions, descriptions | PG to Creating UIs | 9.2.4.2 | |
G- prefix | PG to Creating UIs | 9.2.4.2 | |
Generate Data Descriptions function | PG to Creating UIs | 9.2.4.2 | |
Generate Index Program function | PG to Creating UIs | 9.2.4.2 | |
Generate Skeleton Program function | PG to Creating UIs | 9.2.4.2 | |
generated program | PG to Creating UIs | 9.2.6 | |
generating an index program | PG to Creating UIs | 9.2.7.1 | |
generating COBOL code for | PG to Creating UIs | 10.1.8 | |
generating index program | PG to Creating UIs | 9.1 | |
Group menu | PG to Creating UIs | 9.2.3.8 | |
Group Properties menu | PG to Creating UIs | 9.2.3.9 | |
Group Properties menu popup | PG to Creating UIs | 9.2.5 | |
group, delete definition | PG to Creating UIs | 9.2.4.2 | |
groups, assign properties | PG to Creating UIs | 9.2.4.2 | |
groups, definition | PG to Creating UIs | 9.2.4.2 | |
groups, deleting | PG to Creating UIs | 9.2.4.2 , 9.2.4.2 | |
groups, repeating horizontally | PG to Creating UIs | 9.2.4.2 | |
groups, repeating vertically | PG to Creating UIs | 9.2.4.2 | |
groups, selecting properties | PG to Creating UIs | 9.2.4.2 | |
help | PG to Creating UIs | 9.2.1.1 , 9.2.3 | |
Highlight Left Special Character function | PG to Creating UIs | 9.2.4.2 | |
Highlight Right Special Character | PG to Creating UIs | 9.2.4.2 | |
IDX and advanced IDX | PG to Creating UIs | 9.2.4.2 | |
IDX, difference between advanced-IDX | PG to Creating UIs | 9.2.4.2 | |
index program, defining alternative keys | PG to Creating UIs | 9.2.4.2 , 9.2.4.2 , 9.2.4.2 | |
index program, defining prime key | PG to Creating UIs | 9.2.4.2 | |
index program, IDX or advanced IDX | PG to Creating UIs | 9.2.4.2 | |
index program, removing key definitions | PG to Creating UIs | 9.2.4.2 | |
indexed sequential file | PG to Creating UIs | 9.2.4.2 | |
information line | PG to Creating UIs | 9.2.1.1 | |
Insert Line function | PG to Creating UIs | 9.2.4.2 | |
invoking | PG to Creating UIs | 9.2.1 | |
JUSTIFIED RIGHT clause | PG to Creating UIs | 9.2.5 | |
key functions | PG to Creating UIs | 9.2.2 | |
leaving | PG to Creating UIs | 9.2.4.2 | |
line drawing | PG to Creating UIs | 9.2.3.5 , 9.2.4.2 | |
line drawing, erasing and moving | PG to Creating UIs | 9.2.4.2 | |
line drawing, single and double lines | PG to Creating UIs | 9.2.4.2 | |
Load File function | PG to Creating UIs | 9.2.4.2 | |
Load menu | PG to Creating UIs | 9.2.3.10 | |
loading forms | PG to Creating UIs | 9.2.4.2 | |
Main menu | PG to Creating UIs | 9.2.3.13 | |
manipulating data | PG to Creating UIs | 10.1.6 | |
manipulating text | PG to Creating UIs | 10.1.6 | |
Mark Block function | PG to Creating UIs | 9.2.4.2 | |
Mark Fields function | PG to Creating UIs | 9.2.4.2 | |
Mark Fields menu | PG to Creating UIs | 9.2.3.11 | |
Mark First Alternative Key function | PG to Creating UIs | 9.2.4.2 | |
Mark Prime Key function | PG to Creating UIs | 9.2.4.2 | |
Mark Second Alternative Key function | PG to Creating UIs | 9.2.4.2 | |
Mark Third Alternative Key function | PG to Creating UIs | 9.2.4.2 | |
menu system | PG to Creating UIs | 9.2.3 | |
Move mode | PG to Creating UIs | 9.2.4.2 | |
name checking | PG to Creating UIs | 9.1 | |
NO ECHO clause | PG to Creating UIs | 9.2.5 | |
Paint Attribute function | PG to Creating UIs | 9.2.4.2 | |
Paste Block function | PG to Creating UIs | 9.2.4.2 | |
picture string checking | PG to Creating UIs | 9.1 | |
PROMPT clause | PG to Creating UIs | 9.2.5 | |
quitting | PG to Creating UIs | 9.2.4.2 | |
Read Attribute function | PG to Creating UIs | 9.2.4.2 | |
Read Character function | PG to Creating UIs | 9.2.4.2 | |
Read-key function | PG to Creating UIs | 9.2.7.4 | |
Read-next function | PG to Creating UIs | 9.2.7.4 | |
removing key indexes | PG to Creating UIs | 9.2.4.2 | |
Repeat Group Horizontally function | PG to Creating UIs | 9.2.4.2 | |
Repeat Group Vertically function | PG to Creating UIs | 9.2.4.2 | |
REQUIRED clause | PG to Creating UIs | 9.2.5 | |
Restore Block function | PG to Creating UIs | 9.2.4.2 | |
Rewrite function | PG to Creating UIs | 9.2.7.4 | |
roll attributes | PG to Creating UIs | 9.2.3.2 | |
Save File function | PG to Creating UIs | 9.2.4.2 | |
Save menu | PG to Creating UIs | 9.2.3.12 | |
Screen Name function | PG to Creating UIs | 9.2.4.2 | |
Screen section clauses | PG to Creating UIs | 9.2.5 | |
Screen to Editor function | PG to Creating UIs | 9.2.4.2 | |
Select Alternate Index Key function | PG to Creating UIs | 9.2.7.4 | |
Select Field Clause function | PG to Creating UIs | 9.2.4.2 | |
Select Group Clause function | PG to Creating UIs | 9.2.4.2 | |
Select Special Character function | PG to Creating UIs | 9.2.4.2 | |
selecting roll attributes | PG to Creating UIs | 9.2.3.2 | |
Set Background Attribute function | PG to Creating UIs | 9.2.4.2 | |
Set Clear Screen Mode function | PG to Creating UIs | 9.2.4.2 | |
Set Default Attribute function | PG to Creating UIs | 9.2.4.2 | |
Set Drawing Mode function | PG to Creating UIs | 9.2.4.2 | |
Set Field Order function | PG to Creating UIs | 9.2.4.2 | |
Set Field Type function | PG to Creating UIs | 9.2.4.2 | |
Set IDX Mode function | PG to Creating UIs | 9.2.4.2 | |
Set Line Mode function | PG to Creating UIs | 9.2.4.2 | |
Set Monitor function | PG to Creating UIs | 9.2.4.2 | |
Set Program Mode | PG to Creating UIs | 9.2.7.4 | |
Set Roll Attribute functions | PG to Creating UIs | 9.2.4.2 , 9.2.4.2 , 9.2.4.2 , 9.2.4.2 , 9.2.4.2 | |
setting attributes on and off | PG to Creating UIs | 9.2.4.2 | |
Show Previously Saved Screen function | PG to Creating UIs | 9.2.4.2 | |
SIZE clause | PG to Creating UIs | 9.2.5 | |
skeleton program | PG to Creating UIs | 9.2.6 | |
skeleton program - generating | PG to Creating UIs | 9.2.4.2 | |
special characters - choosing | PG to Creating UIs | 9.2.4.2 | |
special characters - displaying | PG to Creating UIs | 9.2.4.2 | |
special characters, choosing | PG to Creating UIs | 9.2.4.2 | |
special characters, reading | PG to Creating UIs | 9.2.4.2 | |
.SS files | PG to Creating UIs | 9.2.4.2 | |
Start< function | PG to Creating UIs | 9.2.7.4 | |
Start= function | PG to Creating UIs | 9.2.7.4 | |
Store Block function | PG to Creating UIs | 9.2.4.2 | |
store blocks, maximum | PG to Creating UIs | 9.2.4.2 | |
TO phrase | PG to Creating UIs | 9.2.5 | |
transfering to Editor | PG to Creating UIs | 9.2.4.2 | |
Unmark Key function | PG to Creating UIs | 9.2.4.2 | |
unmarking a block | PG to Creating UIs | 9.2.4.2 | |
using | PG to Creating UIs | Ch10 | |
USING phrase | PG to Creating UIs | 9.2.5 | |
.wks files | PG to Creating UIs | 9.2.4.2 | |
Write function | PG to Creating UIs | 9.2.7.4 | |
ZERO FILL clause | PG to Creating UIs | 9.2.5 |
Screens limit | PG to Writing Programs | 3.2.10 |
Screenset | Dialog System CMUG | 1.1 , 3.1 | |
Getting Started | 1.3.3 | ||
listing | Dialog System CMUG | Ch15 | |
multiple | Dialog System CMUG | 13.2 | |
palette | Dialog System CMUG | 17.3 | |
POP | Dialog System CMUG | 13.2 | |
Dialog System CMUG | Ch15 | ||
PUSH | Dialog System CMUG | 13.2 |
Screenset conversion utility | Dialog System CMUG | 16.2 |
Screenset name | |||
trap field | Dialog System CMUG | 11.1.1.1 |
Screenset switches | Dialog System CMUG | 4.2.5 |
Screensets | |||
conversion | Dialog System CMUG | 16.2 | |
DOS | Dialog System CMUG | 16.1.1 | |
UNIX | Dialog System CMUG | 16.1.2 |
scrntype | PG to Communications | 7.5.1 |
Scroll | |||
Windows default window | PG to Creating UIs | 16.3.4 |
Scroll Bars | PG to Creating UIs | 20.2.3.5.9 |
Scroll bars | PG to Creating UIs | 20.2.1.1.1 |
Scroll region | |||
on terminal | User's Guide | 15.2.2.3.2 |
Scrolling | PG to Creating UIs | 20.2.3.2 | |
data | Dialog System CMUG | 18.3 | |
direction in panel | PG to Creating UIs | 11.2.3 | |
groups | Dialog System CMUG | 23.2 | |
panel | PG to Creating UIs | 11.2.5 | |
screen | Compatibility Guide | 2.3.7.6 |
Scrolling field | Dialog System CMUG | 8.1.1 |
SD | Dialog System CMUG | 10.1.1.12 , 20.2 |
SDE | |||
running with Animator | LMF Admin Guide | 2.4.2 |
Search | |||
serial | Language Reference | 16.1.1 |
Search a table | Language Reference | 16.1.1 |
SEARCH ALL operation | Language Reference | 16.1.1 |
Search function in Hyhelp | Character Tools | 10.1.5.2 |
Search order | |||
files | PG to File Handling | 2.3.2 | |
programs | User's Guide | 13.2 | |
subprograms | User's Guide | 13.2 |
Search path | |||
for terminfo file | User's Guide | 15.2.1 |
Search sequence | |||
Compiler | User's Guide | 5.6.1 | |
dynamic loader | User's Guide | 7.1.6.1 | |
.int and .gnt files | User's Guide | 7.1.6.1 |
SEARCH statement | LR - Additional Topics | 4.15.9 , 5.11.6 | |
Language Reference | 16.1.1 |
Searching | |||
in the RTE | PG to Writing Programs | 1.11 | |
multiple directories | PG to Writing Programs | 1.12.1 |
Secondary window | PG to Creating UIs | 20.2.1.2 | |
relationship to primary window | PG to Creating UIs | 20.2.1.2 |
SECTION | PG to Writing Programs | 1.5.1.3 , 1.5.2.1 | |
EXIT | Language Reference | 13.1.3 |
Section header | Language Reference | 3.6.2.2 |
Section-name | Language Reference | 2.2.2.1 |
Sections | |||
counting | Character Tools | 5.3.4 |
SECURE clause | Language Reference | 9.1.1.26 |
SECURE field | PG to Creating UIs | 5.2.3.3 |
SECURE option | LR - Additional Topics | 10.4.2 |
Security | |||
Fileshare | PG to File Handling | 14.13 |
Security key port address | User's Guide | 13.2 |
SEG Compiler directive | User's Guide | 4.6.3 , 6.3 | |
PG to Writing Programs | 1.5.2.1 |
SEGCROSS Compiler directive | User's Guide | 6.3 | |
PG to Writing Programs | 1.1.1.2 , 1.5.1.1 |
Segment breaking | User's Guide | 6.3 , 6.3 |
SEGMENT-LIMIT clause | LR - Additional Topics | 3.2.2 | |
Compatibility Guide | 2.3.3.4 | ||
Language Reference | 6.1.2.2 |
Segment-number | LR - Additional Topics | 3.2.1 , 3.2.2 |
Segmentation | LR - Additional Topics | Ch3 | |
PG to Writing Programs | 1.5.1 , 1.5.1 , 1.5.2 | ||
boundary crossing | PG to Writing Programs | 1.5.1.1 , 1.5.1.1 | |
numbering | Compatibility Guide | 7.1.6 |
Segmentation classification | LR - Additional Topics | 3.1.2 |
Segmentation control | LR - Additional Topics | 3.1.3 |
Segmented program | PG to Writing Programs | 3.2.2 , 3.2.12 | |
generating | User's Guide | 5.4.1 |
SEGSIZE Compiler directive | User's Guide | 6.3 | |
PG to Writing Programs | 1.5.1.2 , 1.5.1.2 |
Select | |||
files in Directory Facility V2 | PG to Creating UIs | Ch21 | |
menu choice in Panels V2 | PG to Creating UIs | 20.2.3.1 | |
object in Panels V2 | PG to Creating UIs | 20.2.3.1 |
Select all entries | |||
export | Dialog System CMUG | 4.2.10.2 |
Select all panels | |||
export | Dialog System CMUG | 4.2.10.6 |
SELECT clause | Language Reference | 6.1.3.2 |
Select error message filename | Dialog System CMUG | 5.2.1 |
Select first panel | Dialog System CMUG | 6.2.4 |
Select function in Screens | |||
Alternate Index Key | PG to Creating UIs | 9.2.7.4 | |
Field Clause | PG to Creating UIs | 9.2.4.2 | |
Group Clause | PG to Creating UIs | 9.2.4.2 | |
Special Character | PG to Creating UIs | 9.2.4.2 |
Select monochrome attribute palette | User's Guide | 12.3 |
SELECT statement | Compatibility Guide | 2.3.4.3 , 7.2.15 , 15.3 | |
PG to File Handling | 14.5.2 |
"select" method | OO Programming | 8.4 , 16.4 , 27.6 |
Selecting | |||
background/foreground | Character Tools | 8.2.3.2.1 | |
files | Character Tools | Ch6 | |
screen type in Forms-2 | Character Tools | 8.2.3.1.1 |
Selection | |||
box in Panels V2 | PG to Creating UIs | 20.2.3.5.10 | |
list in Panels V2 | PG to Creating UIs | 20.2.3.1 |
Selection bar | Dialog System CMUG | 3.1.5 , 9.2.1 | |
data group | Dialog System CMUG | 9.3.2 | |
functions | Dialog System CMUG | 10.1.1.11 | |
in list in On-line Help | PG to Creating UIs | 22.2.4.5 | |
menu | Dialog System CMUG | 9.2.1 | |
text group | Dialog System CMUG | 9.4.2 |
Selection objects | Language Reference | 13.1.3 |
Selection subjects | Language Reference | 13.1.3 |
Self | OO Programming | 20.2.4.2 |
Selfclass | OO Programming | 20.2.4.2 |
Semantic checking | |||
import | Dialog System CMUG | 4.2.9.2 |
Sending messages | OO Programming | 5.2 , 13.2 , 19.4 |
Sending signals | OO Programming | 32.2.4 |
Sentences | Language Reference | 3.5.4 |
SEPARATE CHARACTER clause | LR - Additional Topics | 1.4.19 |
Separators | Language Reference | 2.2.1 , 2.2.1 , 2.2.1 |
Seq-numbers | Character Tools | 5.5.3 |
SEQCHK Compiler directive | User's Guide | 6.3 | |
Language Reference | 3.6.1.1 | ||
Character Tools | 7.2.3.1 |
Sequence number area | Language Reference | 3.6.1.1 |
Sequence numbers | Language Reference | 1.2.2 , 3.6.1.1 | |
editing | Character Tools | 7.2.3.1 | |
RESEQ Animator directive | Character Tools | A.2.1 |
Sequential access | Language Reference | 4.2.8.3 , 4.2.10.2 , 15.1.2 , 15.1.5 , 16.1.13 , 16.1.13 |
SEQUENTIAL Compiler directive | User's Guide | 6.3 , 6.3 | |
PG to File Handling | 3.1.1.2 , 9.1.10 | ||
Language Reference | 4.2.8.2 |
Sequential file | Language Reference | 15.1.2 , 15.1.2 , 15.1.2 , 16.1.13 |
Sequential files | Compatibility Guide | 15.1.1 | |
Language Reference | 4.2.8.1 , 12.1.7 , 14.1.7 , 14.1.7 | ||
locking | Compatibility Guide | 7.2.9 | |
PG to File Handling | 6.7.1 | ||
record files | PG to File Handling | 3.1.1.2 |
Serial search | Language Reference | 16.1.1 |
Server | |||
background process | PG to Communications | 7.8 | |
connecting to mfserver | PG to Communications | 7.7 | |
default name | PG to Communications | 7.8 | |
managing | PG to Communications | 7.10 | |
name | PG to Communications | 7.8 | |
options | PG to Communications | 7.10 | |
override | PG to Communications | 7.10.4 | |
passwords | PG to Communications | 7.10.2 | |
shutting down | PG to Communications | 7.10.1 | |
starting | PG to Communications | 7.8 | |
user-written | PG to Communications | 7.2 |
Server controlled file management | PG to Communications | 7.11.6 |
Server Express Development Environment | |||
See SDE |
Server license | AS Licensing | 1.2 |
servername | PG to Communications | 7.5.1 |
SERVICE statement | Language Reference | 16.1.2 |
Session names | |||
specifying | Character Tools | 2.5.2.6 |
Session Recorder | Character Tools | Ch12 | |
Getting Started | 1.4 |
$SET | |||
statements | User's Guide | 8.2.6.2.2 |
SET ADDRESS statement | PG to Writing Programs | 9.2.2.3 |
SET command | Compatibility Guide | 1.3.2.1 |
Set default directory | |||
generate | Dialog System CMUG | 12.2.3 |
Set details | Dialog System CMUG | 4.2.7 |
SET DOWN BY | Language Reference | 16.1.3 , 16.1.3 |
Set function in Screens | |||
Set Background Attribute | PG to Creating UIs | 9.2.4.2 | |
Set Clear Screen Mode | PG to Creating UIs | 9.2.4.2 | |
Set Default Attribute | PG to Creating UIs | 9.2.4.2 | |
Set Drawing Mode | PG to Creating UIs | 9.2.4.2 | |
Set Field Order | PG to Creating UIs | 9.2.4.2 | |
Set Field Type | PG to Creating UIs | 9.2.4.2 | |
Set IDX Mode | PG to Creating UIs | 9.2.4.2 | |
Set Line Mode | PG to Creating UIs | 9.2.4.2 | |
Set Monitor Type | PG to Creating UIs | 9.2.4.2 | |
Set Program Mode | PG to Creating UIs | 9.2.7.4 |
Set insert | |||
Adis function | PG to Creating UIs | 7.2.3 |
SET statement | Compatibility Guide | 1.3.1.12 | |
Language Reference | 8.1.1.23 , 16.1.3 |
$SET statement portability | PG to Writing Programs | 5.1.6.10 |
$SET statements | User's Guide | 8.2.6.2.2 , 8.2.6.2.3 |
SET TO FALSE | Language Reference | 16.1.3 |
SET TO TRUE | Language Reference | 16.1.3 |
SET UP BY | Language Reference | 16.1.3 , 16.1.3 |
SETCUR | Dialog System CMUG | 10.1.1.3 , 20.2 |
setenv | PG to Communications | 7.5.1 |
SETF | Dialog System CMUG | 10.1.1.18 , 20.2 |
Setting | |||
color on printer | PG to Writing Programs | 18.2.2 | |
event mask | PG to Creating UIs | 8.2.3.4 | |
number of heaps | User's Guide | 13.2 | |
number of record locks | User's Guide | 13.2 | |
printer font | PG to Writing Programs | 18.2.2 | |
programmable switch | PG to Writing Programs | 18.2.2 | |
run-time switch | PG to Writing Programs | 18.2.2 | |
stack size default | User's Guide | 13.2 | |
switches | User's Guide | 11.2.2.2 |
SETTING Compiler directive | User's Guide | 6.3 |
Setting environment variables | Language Reference | 12.1.1 , 12.1.13 | |
external filename assignment | PG to File Handling | 2.2.3.1 |
Setting environment variables using Mfextmap | PG to Writing Programs | 2.4 |
Setting maximum available memory | User's Guide | 13.2 |
Setting the value of a bit | PG to Creating UIs | 8.2.3.4 |
Setup | |||
Adis configuration | PG to Creating UIs | 4.2.8 |
se_compat_locking run-time tunable | User's Guide | 12.3 |
SFAT | Dialog System CMUG | 10.1.1.1 , 20.2 |
SGAT | Dialog System CMUG | 10.1.1.1 , 20.2 |
SHADOW configuration parameter | Dialog System CMUG | 17.5 |
Shared data | OO Programming | 20.2 , 20.2 , 20.2.4.1 |
Shared library file | User's Guide | 7.1.1 |
Shared memory | |||
sample programs | User's Guide | ApD |
Shared object file | User's Guide | 7.1.1 |
Shared run-time system | |||
Windows applications | PG to Creating UIs | 16.4.5.1 |
shared_memory_segment_size run-time tunable | User's Guide | 12.3 |
Sharing data | Language Reference | 5.1.2.2.1 |
shell | |||
calling | PG to Writing Programs | 10.9.1 |
Shift keys | Dialog System CMUG | 19.3 , 20.2 | |
codes | PG to Creating UIs | 4.2.9.4.1 | |
detecting states | PG to Creating UIs | 4.2.9.4.2 | |
determining available keys | PG to Creating UIs | 4.2.9.4.1 | |
enabling/disabling using Adis | PG to Creating UIs | 4.2.9.4.3 | |
in Adis | PG to Creating UIs | 4.2.9.1.3 | |
support in Adis | PG to Creating UIs | 4.2.9.4 |
Shift to graphics mode | PG to Creating UIs | 24.1 |
Shipping | OO Programming | 25.3 | |
Getting Started | 1.3.1.1 , 1.6.1 | ||
application server | User's Guide | 1.4 |
Shipping applications | User's Guide | 1.4 |
SHLIB_PATH environment variable | User's Guide | 7.1.4 , 11.2.1 , ApA |
Show default directory | |||
generate | Dialog System CMUG | 12.2.1 |
Show Panel | Dialog System CMUG | 6.2.2 |
Show Previously Saved Screens function in Screens | PG to Creating UIs | 9.2.4.2 |
Show-analyzer CSI option | Character Tools | 5.5.1 |
SHOW-DIR Compiler directive | User's Guide | 6.3 |
Show-thru CSI option | Character Tools | 5.5.1 |
Showing the mouse | |||
using Adis | PG to Creating UIs | 8.1.2 | |
using CBL_SHOW_MOUSE | PG to Creating UIs | 8.2.2.1 |
SHOWSHUFFLE Compiler directive | User's Guide | 6.3 |
SHP | Dialog System CMUG | 10.1.1.19 , 20.2 |
sigaction() function | PG to Writing Programs | 10.9.7.6 |
SIGN clause | LR - Additional Topics | 1.4.19 | |
Compatibility Guide | 1.3.1.10 , 6.1 , 6.1 , 6.1 | ||
Language Reference | 8.1.1.20 , 9.1.1.27 |
SIGN Compiler directive | Compatibility Guide | 1.3.1.10 | |
User's Guide | 6.3 |
Sign condition | Language Reference | 10.1.4.2.6 |
Sign parameter | |||
Convert3 | Compatibility Guide | 9.2.1.6 |
Sign representation | LR - Additional Topics | 11.2.3 | |
Language Reference | 2.6.1 , 2.6.4.4 | ||
COMP-3 | Compatibility Guide | 2.3.2.1 |
Sign-digit | Language Reference | 2.6.4.4 |
SIGN-TRAILING configuration parameter | Dialog System CMUG | 17.5 |
Signal handler | |||
converting | PG to Writing Programs | 10.9.7.4 | |
multiple | PG to Writing Programs | 10.9.7.3 | |
posting | PG to Writing Programs | 10.9.7.1 | |
signal() and sigaction() | PG to Writing Programs | 10.9.7.6 | |
third party software | PG to Writing Programs | 10.9.7.5 | |
writing | PG to Writing Programs | 10.9.7.2 |
Signal handling | PG to Writing Programs | 10.9.7 |
signal() function | PG to Writing Programs | 10.9.7.6 |
Signals | OO Programming | 32.2 , 32.2.1 | |
sending | OO Programming | 32.2.4 |
signal_interface run-time tunable | User's Guide | 12.3 |
signal_regime run-time tunable | User's Guide | 12.3 |
SIGNCOMPARE Compiler directive | User's Guide | 6.3 |
Signed | |||
field format | Dialog System CMUG | 8.1.1 |
Signed receiving items | Language Reference | 10.1.5.8 |
Simple condition | Language Reference | 10.1.4.1 | |
negated | Language Reference | 10.1.4.3.1 |
Simple insertion editing | Language Reference | 8.1.1.15 |
Simulating keys | PG to Creating UIs | 4.2.9.4 |
Simulating keystrokes | User's Guide | 15.2.3.2 |
SIN function | Language Reference | 11.9.46 |
Single record locking | |||
automatic | PG to File Handling | 6.2.3.1.2 | |
manual | PG to File Handling | 6.2.3.1.1 |
Single user mode | PG to File Handling | 14.17 | |
Fileshare | PG to File Handling | 14.1.1 |
Single-byte | |||
line drawing characters | PG to Creating UIs | Ch24 |
Single/double | |||
draw | Dialog System CMUG | 7.4.4.2 |
Size | |||
run-time behavior Compiler directives | User's Guide | 6.1.2.4 |
Size allocation for data items | LR - Additional Topics | 11.3.4 |
SIZE clause | Language Reference | 9.1.1.28 | |
PG to Creating UIs | 4.2.1 , 4.2.1.1.3 , 13.3.2 | ||
in Screens | PG to Creating UIs | 9.2.5 |
Size error condition | Language Reference | 10.1.5.2 |
SIZE option | LR - Additional Topics | 10.4.2 , 10.4.3 |
SIZE phrase | PG to Creating UIs | 13.3.2 |
Sizing windows | PG to Creating UIs | 20.2.1.3 |
Skip Concealed Fields | PG to Creating UIs | 4.2.8 |
SKIP1 statement | Language Reference | 18.6.13 |
SKIP2 statement | Language Reference | 18.6.13 |
SKIP3 statement | Language Reference | 18.6.13 |
Skipping locked records | User's Guide | 13.2 |
skip_on_lock run-time tunable | User's Guide | 12.3 |
SKNF | Dialog System CMUG | 10.1.1.3 , 20.2 |
SKPF | Dialog System CMUG | 10.1.1.3 , 20.2 |
.sl file | User's Guide | 7.1.1 |
SMALLDD Compiler directive | User's Guide | 6.3 | |
PG to Writing Programs | 1.5.1.1 |
smcup | User's Guide | 15.2.2.3 |
smlaccp.cbl sample program | PG to Creating UIs | 2.2.2 |
Sn command in Forms-2 | Character Tools | 8.2.4.3 |
.Snn files in Forms-2 | Character Tools | 8.2.8.1 |
Snn files in Forms-2 | Character Tools | 8.2.2.2.1 |
.so file | User's Guide | 7.1.1 , 7.1.4 |
Sockets | OO Programming | 32.2 , 32.2.2 |
SOM | OO Programming | Ch36 | |
class | OO Programming | 36.3 | |
clients | OO Programming | 36.2 | |
data-type coercion | OO Programming | 36.4 | |
environment parameter | OO Programming | 36.3.5 | |
metaclass | OO Programming | 36.1.1 |
SOM class | |||
debugging | OO Programming | 36.3.3 |
Sorce conversion | |||
RM/COBOL | Compatibility Guide | 4.1 |
Sort | |||
algorithm for fast sort | PG to Writing Programs | 1.1.2.8 | |
efficiency | PG to Writing Programs | 1.1.2.8 | |
s RTS switch | User's Guide | 13.2 |
Sort a table | Language Reference | 16.1.4 , 16.1.4 , 16.1.4 |
Sort dialog | Dialog System CMUG | 10.2.4 |
Sort extension | Dialog System CMUG | 4.2.3.10.2 |
Sort file | Language Reference | 16.1.4 |
Sort items | Character Tools | 5.4 |
Sort key | |||
maximum number | PG to File Handling | 25.1.2 | |
maximum size | PG to File Handling | 25.1.2 |
Sort list | |||
panel field | Dialog System CMUG | 8.1.2.5 |
Sort name | Dialog System CMUG | 4.2.3.5 |
SORT operation | Language Reference | 15.1.3 , 15.1.4 |
Sort operation | Language Reference | 16.1.4 |
Sort operations | |||
controlling duplicates | User's Guide | 13.2 |
Sort size | Dialog System CMUG | 4.2.3.10.1 |
SORT statement | LR - Additional Topics | 3.3.4 | |
Language Reference | 6.1.3.3 , 7.1.2.1 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 , 16.1.4 |
SORT statement collating considerations | PG to Writing Programs | 7.9.3 |
SORT STATUS clause | Language Reference | 6.1.3.2 |
Sort time | Dialog System CMUG | 4.2.3.6 |
SORT-MERGE | Language Reference | 7.1.2.1 |
Sort-Merge file description entry | Language Reference | 3.5 , 14.1.1 |
Sort-Merge files | Language Reference | 6.1.3.2 |
SORT-RETURN special register | Language Reference | 14.1.1 , 16.1.4 |
Sorting | |||
algorithm selection | User's Guide | 13.2 | |
Callable Sort Module | PG to File Handling | Ch13 | |
Extsm | PG to File Handling | Ch13 | |
files | PG to File Handling | Ch5 | |
Mfsort | PG to File Handling | Ch5 |
Sound alarm | PG to Creating UIs | 3.2 |
Sound function | Dialog System CMUG | 10.1.1.24 |
SOUND On-line Help Builder directive | PG to Creating UIs | 22.2.2.1 |
SOURCE clause | LR - Additional Topics | 1.4.20 |
Source code | |||
column 7 | Compatibility Guide | 8.3.4 , 15.3 | |
column 72 | Compatibility Guide | 2.3.1.1 | |
columns 73 to 80 | Compatibility Guide | 7.1.2 | |
reformatting | Compatibility Guide | Ch14 |
Source code listing | Language Reference | 18.6.13 |
Source code portability | PG to Writing Programs | 5.1.7 |
Source compatibility | |||
DG | Compatibility Guide | Ch13 | |
Microsoft COBOL V2.2 | Compatibility Guide | Ch2 | |
RM/COBOL | Compatibility Guide | Ch6 |
Source conversion | |||
DG I COBOL | Compatibility Guide | Ch13 | |
RM/COBOL | Compatibility Guide | Ch6 |
Source file | |||
restrictions | Compatibility Guide | 15.3 |
Source file conventions | User's Guide | 8.2.6.1 |
Source Format | Language Reference | 1.2 |
Source format | Language Reference | 1.2.4 |
Source lines | |||
counting | Character Tools | 5.3.4 | |
locating | Character Tools | 5.4 , 5.4 | |
tagging | Character Tools | 5.4 |
Source listing in CSI | Character Tools | 5.2.2.4 |
SOURCE-COMPUTER paragraph | LR - Additional Topics | 2.2.1 , 4.13.1 |
Source-Computer paragraph | Language Reference | 6.1.2.1 |
SOURCE-EXT Compiler directive | User's Guide | 6.3 |
SOURCEASM Compiler directive | User's Guide | 6.3 | |
PG to Writing Programs | 1.1.4 |
Sourcefile parameter | |||
Convert3 | Compatibility Guide | 9.2.1.2 | |
Convert5 | Compatibility Guide | 16.2.1.2 |
SOURCEFORMAT Compiler directive | User's Guide | 6.3 |
Space | LR - Additional Topics | 4.8 , 5.6 |
Space command in Forms-2 | Character Tools | 8.2.4.1 |
SPACE-FILL option | LR - Additional Topics | 10.4.2 |
Spacing | |||
on screen | Compatibility Guide | 2.3.7.4 |
Sparse keys | PG to File Handling | 9.7.1 |
SPC | Dialog System CMUG | 19.1 |
Special character words | Language Reference | 2.2.2.1 |
Special characters | |||
choosing in Screens | PG to Creating UIs | 9.2.4.2 | |
displaying in Screens | PG to Creating UIs | 9.2.4.2 | |
reading in Screens | PG to Creating UIs | 9.2.4.2 |
Special insertion editing | Language Reference | 8.1.1.15 |
Special operation codes | |||
Callable File Handler | PG to File Handling | 10.5.2 |
Special Registers | |||
general information | Language Reference | 2.2.2.1 , 2.2.4.6 |
Special registers | |||
COL | LR - Additional Topics | 10.1 | |
COM-REG | LR - Additional Topics | Ch9 | |
LENGTH OF | Language Reference | 12.1.4 | |
LIN | LR - Additional Topics | 10.1 | |
LINE-COUNTER | LR - Additional Topics | 1.2.3 | |
PAGE-COUNTER | LR - Additional Topics | 1.2.2 | |
PRINT-SWITCH | LR - Additional Topics | 1.2.4 , 1.5.6 | |
RETURN-CODE | Language Reference | 13.1.6 | |
SORT-RETURN | Language Reference | 14.1.1 , 16.1.4 | |
TALLY | Language Reference | 13.1.4 , 13.1.6 |
Special terminal facilities | User's Guide | 15.2.3 |
Special-Names paragraph | LR - Additional Topics | 4.13.3 , 5.9.2 , 10.2.1 | |
Compatibility Guide | 2.3.3.1 | ||
Language Reference | 6.1.2.3 | ||
CURSOR IS clause | PG to Creating UIs | 4.2.4 |
Specifications | |||
explicit and implicit | Language Reference | 2.6.6 |
Specifying output files in Forms-2 | Character Tools | 8.2.2.2.1 , 8.2.4.3 |
Specifying system parameters | Compatibility Guide | 3.3 |
Speed | |||
animation | Getting Started | 4.1.5 | |
language features Compiler directives | User's Guide | 6.1.1.5 | |
run-time behavior Compiler directives | User's Guide | 6.1.2.4 |
Split filename | PG to File Handling | 2.4 |
Split key | Compatibility Guide | 3.1.4 | |
Language Reference | 4.2.10.1 |
SPZERO Compiler directive | User's Guide | 6.3 |
SQL | |||
ODBC API | PG to File Handling | 17.4 | |
sample programs | User's Guide | ApD , ApD |
SQL Compiler directive | User's Guide | 6.3 | |
PG to File Handling | 18.6.1 | ||
ACCESS | PG to File Handling | 18.6.1 | |
ACTION | PG to File Handling | 18.6.1 | |
BIND | PG to File Handling | 18.6.1 | |
BLOCK | PG to File Handling | 18.6.1 | |
CCSIDG | PG to File Handling | 18.6.1 | |
CCSIDM | PG to File Handling | 18.6.1 | |
CCSIDS | PG to File Handling | 18.6.1 | |
CHARSUB | PG to File Handling | 18.6.1 | |
COLLECTION | PG to File Handling | 18.6.1 | |
COMMIT | PG to File Handling | 18.6.1 | |
CONNECT | PG to File Handling | 18.6.1 | |
CTRACE | PG to File Handling | 18.6.1 | |
DB | PG to File Handling | 18.6.1 | |
DB2 | PG to File Handling | 18.6.1 | |
DBMAN | PG to File Handling | 18.6.1 | |
DEC | PG to File Handling | 18.6.1 | |
DECDEL | PG to File Handling | 18.6.1 | |
DEGREE | PG to File Handling | 18.6.1 | |
DISCONNECT | PG to File Handling | 18.6.1 | |
DYNAMICRULES | PG to File Handling | 18.6.1 | |
ECSPP | PG to File Handling | 18.6.1 | |
EXPLAIN | PG to File Handling | 18.6.1 | |
EXPLSNAP | PG to File Handling | 18.6.1 | |
FORMAT | PG to File Handling | 18.6.1 | |
FUNCPATH | PG to File Handling | 18.6.1 | |
INIT | PG to File Handling | 18.6.1 | |
INSERT | PG to File Handling | 18.6.1 | |
ISOLATION | PG to File Handling | 18.6.1 | |
LEVEL | PG to File Handling | 18.6.1 | |
NOT | PG to File Handling | 18.6.1 | |
OWNER | PG to File Handling | 18.6.1 | |
PASS | PG to File Handling | 18.6.1 | |
PRE | PG to File Handling | 18.6.1 | |
QUALIFIER | PG to File Handling | 18.6.1 | |
QUERYOPT | PG to File Handling | 18.6.1 | |
RELEASE | PG to File Handling | 18.6.1 | |
REPLVER | PG to File Handling | 18.6.1 | |
RETAIN | PG to File Handling | 18.6.1 | |
SQLERROR | PG to File Handling | 18.6.1 | |
SQLFLAG | PG to File Handling | 18.6.1 | |
SQLRULES | PG to File Handling | 18.6.1 | |
SQLWARN | PG to File Handling | 18.6.1 | |
STDLVL | PG to File Handling | 18.6.1 | |
STRDEL | PG to File Handling | 18.6.1 | |
SYNCPOINT | PG to File Handling | 18.6.1 | |
TEXT | PG to File Handling | 18.6.1 | |
VALIDATE | PG to File Handling | 18.6.1 | |
VERSION | PG to File Handling | 18.6.1 |
SQL Option - ACCESS | User's Guide | 6.3 |
SQL Option - BIND | User's Guide | 6.3 |
SQL Option - BLOCK | User's Guide | 6.3 |
SQL Option - COMMIT | User's Guide | 6.3 |
SQL Option - CTRACE | User's Guide | 6.3 |
SQL Option - DB | User's Guide | 6.3 |
SQL Option - DB2 | User's Guide | 6.3 |
SQL Option - DBMAN | User's Guide | 6.3 |
SQL Option - ECSPP | User's Guide | 6.3 |
SQL Option - FORMAT | User's Guide | 6.3 |
SQL Option - INIT | User's Guide | 6.3 |
SQL Option - ISOLATION | User's Guide | 6.3 |
SQL Option - NOT | User's Guide | 6.3 |
SQL Option - PASS | User's Guide | 6.3 |
SQL Option - PRE | User's Guide | 6.3 |
SQL Option - STDLVL | User's Guide | 6.3 |
SQL Server | PG to File Handling | 17.2.1 |
SQRT function | Language Reference | 11.9.47 |
srvanim | PG to Communications | 7.5.1 |
srverrprog | PG to Communications | 7.5.1 |
srvprog | PG to Communications | 7.5.1 , 7.5.2 |
srvtier | PG to Communications | 7.5.1 |
.SS file | PG to Creating UIs | 9.2.4.2 |
SSTRAN conversion utility | Dialog System CMUG | 16.2 |
Stack | |||
ordering parameters on | PG to Writing Programs | 9.1.2.1 | |
removing parameters from | PG to Writing Programs | 9.1.2.2 |
Stack block | Dialog System CMUG | 7.1.4 , 23.1 |
Stack functions | Dialog System CMUG | 10.1.1.5 |
Stack overflow | PG to Writing Programs | 4.4.3 |
Stack size | |||
set default | User's Guide | 13.2 |
STACKSIZE | |||
.def file | PG to Creating UIs | 14.4.2 , 15.4.2 | |
Windows application | PG to Creating UIs | 16.3.1.2 |
Standalone preprocessor | PG to File Handling | 17.2.3 |
Standard alignment rules | Language Reference | 2.6.2 |
Standard license | AS Licensing | 1.2 |
STANDARD-DEVIATION function | Language Reference | 11.9.48 |
START | |||
Callable File Handler | PG to File Handling | 10.5.1 |
Start function in Screens | PG to Creating UIs | 9.2.7.4 , 9.2.7.4 |
START statement | LR - Additional Topics | 10.5.4 | |
Language Reference | 16.1.5 , 16.1.5 , 16.1.5 , 16.1.5 | ||
locking | Compatibility Guide | 2.3.4.3 |
Start/close file | |||
trace menu | Dialog System CMUG | 11.2.1.1 |
Starting an OLE server | OO Programming | 35.2 , 35.3.2 |
Starting the client | PG to Communications | 7.8 |
Starting the server | PG to Communications | 7.8 |
Startup function | |||
Windows | PG to Creating UIs | 16.4.7 |
Startup module | |||
32-bit Windows applications | PG to Creating UIs | 17.1.3 | |
Windows applications | PG to Creating UIs | 16.4.3 |
Statements | Language Reference | 3.5.4 | |
counting | Character Tools | 5.3.4 |
Static analysis | Getting Started | 1.4 |
Static file assignment | PG to File Handling | 2.2.1 |
Static filename assignment | PG to File Handling | 2.2 |
Static linked run-time system | |||
Windows applications | PG to Creating UIs | 16.3.1.2 , 16.4.5.1 |
Static linking | Compatibility Guide | 1.3.3.1 | |
User's Guide | 3.3 , 7.1.1 , 7.1.2 , 7.1.5 | ||
call requirements | PG to Writing Programs | 1.5.3.1 | |
through LITLINK | PG to Writing Programs | 1.1.3.1 | |
Windows subprograms | PG to Creating UIs | 16.4.5.5 |
Statically linked program | User's Guide | 8.2 | |
creating | User's Guide | 7.2.4 , 9.1 , 9.1 | |
running | User's Guide | 11.2.1 |
Statistics on license use | AS Licensing | 3.3 |
stats command | AS Licensing | 3.3 |
Status codes | |||
ANSI | User's Guide | 13.2 | |
file I-O | LR - Additional Topics | 11.3.13 | |
from Panels | PG to Creating UIs | 11.2.7 |
Status key 1 | Language Reference | 10.1.6.2.1 , 10.1.6.2.1 |
Status key 2 | Language Reference | 10.1.6.2.2 , 10.1.6.2.2 , 10.1.6.2.2 , 10.1.6.2.2 , 10.1.6.2.2 , 10.1.6.2.2 |
Status key combinations | Language Reference | 10.1.6.2.3 |
Status keys | Dialog System CMUG | 19.3 | |
Language Reference | 6.1.2.3 |
Status line | Dialog System CMUG | 2.1.1 |
STDERR Compiler directive | User's Guide | 6.3 |
STEP | |||
Callable File Handler | PG to File Handling | 10.5.1 |
Step | |||
trace menu | Dialog System CMUG | 11.2.1.2 |
Step mode | Getting Started | 4.1.5.1 |
STICKY-LINKAGE Compiler directive | User's Guide | 6.3 |
STICKY-PERFORM Compiler directive | User's Guide | 6.3 |
stockin.cbl | PG to File Handling | 6.9 |
stockioa.cbl | PG to File Handling | 6.9 |
stockout.cbl | PG to File Handling | 6.9 |
STOP literal | Language Reference | 16.1.6 |
STOP RUN | Language Reference | 16.1.6 |
STOP statement | LR - Additional Topics | 4.15.10 , 11.3.12 | |
Language Reference | 16.1.6 |
Stopping | |||
Fileshare | PG to File Handling | 14.2.2.3 |
Stopwatch class | OO Programming | 13.1 |
Storage representation of data types | PG to Writing Programs | 9.2.2.3 |
Store Block | |||
in Screens | PG to Creating UIs | 9.2.4.2 | |
in Screens, maximum | PG to Creating UIs | 9.2.4.2 |
Stored procedures | |||
Embedded SQL using DB2 | PG to File Handling | 18.4.4.2 |
Stride | PG to Writing Programs | 1.1.1.1 , 1.1.2.3 |
String | |||
CBL_NLS_COMPARE | PG to Writing Programs | 7.8 | |
CBL_TOLOWER | PG to Writing Programs | 18.2.2 | |
CBL_TOUPPER | PG to Writing Programs | 18.2.2 | |
printing | User's Guide | 15.2.3.4.3 |
STRING statement | LR - Additional Topics | 4.15.11 , 5.11.7 | |
Language Reference | 16.1.7 | ||
versus reference modification | PG to Writing Programs | 2.2 |
Striping | |||
configuration options | PG to File Handling | 10.12.2 | |
Fileshare | PG to File Handling | 10.12.3 | |
headers | PG to File Handling | 10.12.1 | |
MaxStripeDigits option | PG to File Handling | 10.12.2 | |
MaxStripeFiles option | PG to File Handling | 10.12.2 | |
MaxStripeSize option | PG to File Handling | 10.12.2 | |
overview | PG to File Handling | 10.12 | |
Stripe-x option | PG to File Handling | 10.12.2 | |
StripeNameType option | PG to File Handling | 10.12.2 | |
striping option | PG to File Handling | 10.12.2 |
STRUCT Compiler directive | User's Guide | 6.3 | |
Character Tools | 2.4.3.4 , 11.2.1 , 11.2.1 |
Structure | |||
changing window | Character Tools | 11.3 | |
query menu | Character Tools | 11.3 |
Structure Animator | Character Tools | 2.4.4.4 , Ch11 | |
Getting Started | 1.4 | ||
display | Character Tools | 11.3 | |
invoking | Character Tools | 11.2.2 | |
preparing programs for | Character Tools | 11.2.1 | |
sample session | Getting Started | 4.3.2 |
Structure diagrams | |||
changing the color | Character Tools | 11.4.4 | |
moving around | Character Tools | 11.4.3 | |
printer configurations | Character Tools | 11.5 | |
printing | Character Tools | 11.4.5 , 11.5.9 | |
setting off | Character Tools | 11.3 | |
setting on | Character Tools | 11.3 |
Structure/code toggle | Character Tools | 11.3 |
Structures | PG to File Handling | 23.1 | |
file | PG to File Handling | Ch23 | |
line sequential | PG to File Handling | 23.2.1 | |
printer sequential | PG to File Handling | 23.2.2 | |
variable | PG to File Handling | 23.3 |
Subclassing GUI objects | OO Programming | 31.3 |
Subprogram | |||
setting search order | User's Guide | 13.2 |
Subroutine parameter | |||
Convert3 | Compatibility Guide | 9.2.1.5 | |
Convert5 | Compatibility Guide | 16.2.1.5 |
Subscript | Dialog System CMUG | 10.1.2.2 | |
maximum number | PG to Writing Programs | 3.1.2 | |
out of range | PG to Writing Programs | 4.4.6 |
Subscripting | Language Reference | 2.6.5.2 , 2.6.5.2 , 2.6.5.2 , 8.1.1.14 |
subserver | PG to Communications | 7.5.1 |
Substitution | |||
line-drawing character rules | PG to Creating UIs | 24.2.5.1 | |
unavailable line draw chars | PG to Creating UIs | 24.2.5 |
Subsystem routines | |||
declare/deallocate | PG to Writing Programs | 18.2.2 |
SUBTRACT statement | Language Reference | 16.1.8 |
Subtrees | |||
common | Character Tools | 11.4.1 | |
returning from | Character Tools | 11.4.1 |
Successor record | Language Reference | 4.2.8.1 |
SUM clause | LR - Additional Topics | 1.4.21 |
Sum counters | LR - Additional Topics | 1.4.21 , 1.4.22 , 1.5.4 |
SUM fucntion | Language Reference | 11.9.49 |
Sum products value/digits | Dialog System CMUG | 5.1.7.3.2 |
Summary report | LR - Additional Topics | 1.5.3 |
Super | OO Programming | 20.2.4.2 |
SUPFF Compiler directive | User's Guide | 6.3 |
Supported environments on Panels V2 | PG to Creating UIs | 20.1 |
Suppress | |||
field format | Dialog System CMUG | 8.1.1 |
SUPPRESS printing | LR - Additional Topics | 1.4.22 |
SUPPRESS PRINTING function | LR - Additional Topics | 1.5.6 |
SUPPRESS statement | LR - Additional Topics | 1.5.6 |
SUPPRESS-CURSOR-RIGHT configuration parameter | Dialog System CMUG | 17.5 , 17.5 |
SUPPRESS-TO-BWZ configuration parameter | Dialog System CMUG | 17.5 |
Suppressing Forms-2 output file generation | Character Tools | 8.2.4.3 |
Suppression editing | Language Reference | 8.1.1.15 |
SUSP | Dialog System CMUG | 10.1.1.8 , 20.2 |
Swap screen character & attribute | PG to Creating UIs | 3.2 |
Switch | PG to File Handling | 9.2.3 | |
COBOL | User's Guide | 13.2 | |
descriptions | User's Guide | Ch13 | |
G | PG to File Handling | 9.2.1 | |
programmable | User's Guide | 13.2 | |
read programmable | PG to Writing Programs | 18.2.2 | |
read run-time | PG to Writing Programs | 18.2.2 | |
RTS | PG to File Handling | 9.2 | |
set run-time | PG to Writing Programs | 18.2.2 | |
setting programmable | PG to Writing Programs | 18.2.2 | |
T | PG to File Handling | 9.2.4 |
SWITCH clause | Language Reference | 6.1.2.3 |
Switch-name | LR - Additional Topics | 12.1.1 |
Switch-status condition | Language Reference | 10.1.4.2.5 |
Switches | User's Guide | 11.2.2.1 , 13.1 | |
OO Programming | ApA | ||
COBOL | User's Guide | 11.2.2.1.1 | |
external | Language Reference | 6.1.2.3 , 6.1.2.3 , 6.1.2.3 , 16.1.3 | |
L6 subprogram search order | PG to Writing Programs | 1.11 | |
programmable | User's Guide | 11.2.2.1.1 | |
Q | PG to File Handling | 4.6.2.1 | |
run-time | Compatibility Guide | 13.8 | |
User's Guide | 11.2.2.1.2 | ||
PG to Writing Programs | 6.5 | ||
setting | User's Guide | 11.2.2.2 | |
setting in COBSW | User's Guide | 11.2.2.2 | |
setting on cobrun command line | User's Guide | 11.2.2.2 |
Switching modes in Forms-2 | Character Tools | 8.2.3.2.3 |
Switching sequences | |||
column | User's Guide | 15.2.3.3 |
Sybase | PG to File Handling | 17.2.3 | |
COBSQL | PG to File Handling | 19.7.3 |
Symbol redefined | OO Programming | 23.3.4 |
SYMBOLIC CHARACTERS clause | Language Reference | 6.1.2.3 , 6.1.2.3 |
SYMBSTART Compiler directive | User's Guide | 6.3 |
SYMBSTART directive | Language Reference | 6.1.2.3 |
SYNC clause | Language Reference | 8.1.1.21 |
Synchronization | Language Reference | 2.6.3 , 2.6.4.2 , 2.6.4.2 , 2.6.4.2 , 8.1.1.21 |
SYNCHRONIZED clause | Language Reference | 8.1.1.1 , 8.1.1.21 |
Syntax check | User's Guide | 1.1.2 | |
Editor | Character Tools | 7.5 | |
using the Editor | User's Guide | 1.1.2 |
Syntax checking | |||
error messages | Error Messages | Ch2 | |
import | Dialog System CMUG | 4.2.9.1 |
Syntax Rules | Language Reference | 2.3.2 |
Syntax-check phase | |||
directives | User's Guide | 5.5.1 |
SYSIN | Compatibility Guide | 1.3.1.8 |
SYSIN Compiler directive | User's Guide | 6.3 |
Sysmets sample program | PG to Creating UIs | 16.6 |
SYSOUT | Compatibility Guide | 1.3.1.9 |
SYSTEM | |||
calling | PG to Writing Programs | 10.9.1 | |
calling system shell | PG to Writing Programs | 10.9.1 |
System | |||
attributes | PG to Writing Programs | 13.3.2.1.1 | |
function key control | PG to Creating UIs | 16.3.3.2 | |
limits | PG to Writing Programs | Ch3 | |
menu | PG to Creating UIs | 20.2.1.1.1 | |
specifications | PG to Writing Programs | 3.1 |
System executable file | User's Guide | 3.1.3 |
System executable files | |||
creating | User's Guide | 4.4 |
System information | Dialog System CMUG | 13.7 |
System linker | |||
ld | User's Guide | 7.2.1 |
System Log File | PG to Communications | 7.11.1 |
System parameters | |||
//q | Compatibility Guide | 3.3 | |
specifying | Compatibility Guide | 3.3 | |
//v | Compatibility Guide | 3.3 |
System shell | |||
calling | PG to Writing Programs | 10.9.1 |
System state | AS Licensing | 3.1 |
System terminfo | User's Guide | 15.1.1.1 |
system() | |||
calling | PG to Writing Programs | 10.9.1 |
System-names | Language Reference | 2.2.2.1 |
Systems programming extensions | |||
with 16-bit Presentation Manager | PG to Creating UIs | 14.1.3 | |
with 32-bit Presentation Manager | PG to Creating UIs | 15.1.3 | |
with Windows | PG to Creating UIs | 16.4.1 |
Copyright © 2002 Micro Focus International Limited. All rights reserved.
This document and the proprietary marks and names used herein are protected by international law.